Question about 2wire Wireless-G 802.11g ADSL Gateway

1 Answer

Att 2701 hg-b modem

Hi i bought a used modem i want to use it on a differentnetwork down in baja that uses the same dsl modem but i can not unlock it from att  does anyone know how i can get it to work i generated wep keys etc cheers m

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Hi , the 2701HG-B by default uses the last 3digits of the SN number as the SSID and the 10 digit number in brackets as the WEP key to access the user interface of the 2701 type in the address bar of your browser 192.168.1.254 and push enter, to access the interface program you will need to run the system set up and you must know the keycode from your service provider and the username and password

Posted on Jan 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Internet setup


It should work "out-of-the-box".
Be sure to connect using "straight-through" (not "cross-over") Ethernet cables.
Connect from the 'WAN' port on the router to your DSL-modem (or cable-modem).
Power-off the DSL/Cable modem.
Power-on the DSL/Cable modem.
Power-off the D-Link.
Power-on the D-Link.
Reboot your computer.
You should be good.

Mar 09, 2014 | D-Link DAP-1522 Xtreme N Duo Wireless...

1 Answer

Hi i have a 2wire gateway 2701HG-B modem I used for AT&T DSL internet. I moved to a location where I cant get AT&T. Is it possible to use this modem with centurylink for internet?


Hello, if centurylink is a DSL service, than you can use it for internet. It appears that Centurylink is a DSL service depending upon which service you get from them. In that case, you can use it for their service.

Thanks for using FixYa!

Aug 15, 2011 | 2wire Wireless-G 802.11g ADSL Gateway

2 Answers

Can I use AT&T 2WIRE 2701HG-B DSL to ant ISP?


look if u wish to go for verizon service,,they will provide u with a wireless modem as well,,but if u tell them that u hav a modem then they might configure this modem only,,both ATT and verizon are DSL service providers with PPPoE connections.the only thing u need is the username and passwrd from verizon which u have to setup on the first page of the 2wire setup page,,both the connections are dhcp based.so no other connection settings change required.But when u talk with verizon make sure u tell them of the 2wire modem

Moreover verizon has wireless broadband service which is actually a express card tat u have to put into your computer and u can go online anywhere u go within ur country{it works like a mobile phone}

best of luck,,keep me posted

May 14, 2009 | 2wire Wireless-G 802.11g ADSL Gateway

1 Answer

Fixing own wifi to dsl modem


I suppose you need to connect the internet using WiFI and not cable DSL . Please follow the below steps.
You need to have a Wireless router in place and connect the DSL to the router , then u need to give an IP to the router.

Configure your laptop to the router device.

Mar 31, 2009 | EnGenius EOC-3220 (EOC3220)

1 Answer

Set up wireless internet access using HG1701 2wire router


Check with this tip
Detail on this Wlan Router
"Connect power cord to router.

Wall Plate -> Router (using phone cord).

Router -> PC (using network cable).

  1. Power on router, when the lights settle, start the PC.
  2. Start IE in PC, type 192.168.1.254 in the address bar and press enter.
  3. Start configuring using the Telco's suplied info, namely PPPoE username and password. All other function works by default.
  4. The WEP key is the 10 digit number underneath the router (not the 12 digits S/N number).

Jan 18, 2009 | 2wire Wireless-G 802.11g ADSL Gateway

1 Answer

Can not get my dsl internet to work


make sure that your firewall settings on your computer is not too high, check also your browser settings make sure that VPN and automatic settings are off , try using safemode with networking

Nov 21, 2008 | 2wire Wireless-G 802.11g ADSL Gateway

1 Answer

2wire 1701 HG Gateway wireless not working


Hi,

There could be a lot of possibilities why you lost your connections at the same time. Could be windows update or changes had been made in your 2wire 2701 HG.Its impossible to say that your wireless adapters turned bad all at the same time.As what you observed , wireless light is off meaning your 2wire doesnt detect any wireless connection. You can try reconnecting them 1 at a time by going to your wireless connection tool or network connections.

If that didnt help, you can use your PC w/c is connected using the USB connection. Using this step, you 'l have a chance to edit and view your wireless network. For you to access your 2wire you must know what your 2wire address {default gateway}. Using your hardwired pc go to start > run > type in cmd then hit enter > on the Dos command screen type in ipconfig and hit enter> youl see your default gateway . It would look like this 192.168.1.254 for example cos sometimes it would vary depending what ISP you have, Open your fav browser and on your address bar type in your default gateway. That would lead you to your 2wire page, there youl have a chnace to view you home network. Check if your wireless encryption and you network name if everything is still the same. {Best thing is to change your wireless name or SSID. Then try to reconnect on your wireless connection for each computer and make sure you have your wireless encryption.

Hope that helps. Pls let me know asap if you need clarifications.

Cheers.



Jun 15, 2008 | Wireless Access Points

1 Answer

Set up


Hi Rbosley,

I found the real manual here,
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&cc=us&dlc=en&product=218413&os=228&lang=en&

Second one down.
Are you using Cable, or DSL. DSL requires you to setup a PPPOE connection, putting in your Username and password for you DSL connection.
Are there any other routerrs on the network? Just making sure you are not trying to use the router then there is one already one on the work.
I would suggest your use the reset button on the back, resetting it to defaults. That way, you should be able to plug in your modem to the WAN port, plug your computer into the LAN port.
Then restart the modem, wait 2 min, power up the router, wait 2 min, and startup the PC. Make sure your IPs are set to automatically get IPs and DNS. The router's DHCP should supply them to your PC.
DSL requries you setup a PPPOE connections, which really just consists of selecting the pppoe option, putting in the infomation, and the doing all the rebooting.

It you still are having issues, get back with us!

Jan 09, 2008 | Compaq iPAQ Connection Point CP-2W...

Not finding what you are looking for?
2wire Wireless-G 802.11g ADSL Gateway Logo

1,915 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Wireless Access Points Experts

noti13

Level 1 Expert

15 Answers

AnyMHz.com
AnyMHz.com

Level 2 Expert

489 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you a 2wire Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...