Watches Logo

Related Topics:

Francois Smit Posted on Nov 10, 2012

How to touch up a black metal watch strap - Watches

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 2 Answers
  • Posted on Nov 10, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Nov 10, 2012
Answers
2
Questions
0
Helped
113
Points
6

I use black nail polish for the chips, cheap and easy

4 Related Answers

Anonymous

  • 5 Answers
  • Posted on Mar 11, 2009

SOURCE: connect metal strap to watch

If it brok at the hinge where the strap connects to the watch itself, then you might just need to replace the clip that slides in. Its a little metal tube with a spring in it. You should be able to find them at any retail shop. If all else fails, take it to a shop or jeweler.

Ad

Anonymous

  • 1 Answer
  • Posted on Jul 23, 2009

SOURCE: Looking for replacement strap for Beverly Hills Polo-club Watch

can't reset the time on a PU103SLA0051.500

Anonymous

  • 65 Answers
  • Posted on Jul 25, 2009

SOURCE: Need a replacement two tone metal watch strap for

Enquire with either a Pulsar dealer or a watchmaker they may be able to get it for you. If you have a trade supplier near you they may also be able to order one if available.

gemineye61

Janelle Schoonover

  • 842 Answers
  • Posted on Jul 22, 2010

SOURCE: hi i have a watch , but need help identifying it

What I would do is search places like Amazon, Ebay or the like and look for others selling the same watch. Once you find a pcture of the watch you have, copy down the description that they have. Good luck

Testimonial: "thank bud x"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Invicta watch instructions

Straps are usually held in place by two spring loaded metal pins between the two lugs on either side of the strap. Look at the ends near the lugs you should be able to see them, use a very small flate blade srewdriver to pull back on the pin and once you get it, it will pop out of the hole its in.
0helpful
1answer

Can't unlock the touch screen to set KC1850

I'm having the same problem. Has anyone figured it out - how to unlock the screen.

N.B. It worked previously, then stopped.
2helpful
4answers

Cerruti watch strap cannot be changed in any watch specialists in middlesbrough and i am just wondering where i will be able to get it done

You probably will have to send it away to get sorted (make sure you send it insured and very well protected).
You should contact cerruti to see who the repair shop is in the UK, (not sure they have one.)
Failing that you may be able to buy a replacement strap of ebay and have a general watch shop change strap for you.
Or find a jewellers that sell straps, they should have one that fits.

---


Please dont forget to vote if you liked my answer


thanks

0helpful
1answer

I have an Oakley Blade watch with a black rubber band,can it be replaced with a metal one?

If you go to their web site (www.oakley.com/) you will see that the illustration a watch similar to yours (it is a Blade II) and shows a metal one.

If you use the store locator to find one that is near you and speak to them about changing the strap.
9helpful
1answer

WV-57H Watch - how do you replace the strap? I have a new strap for this model and can't work out how to take the old one off and fit the replacement. Thanks

If you look at the watch from the side, you'll see that there's a two-part metal piece on the underside of the watch on each side.  The metal piece is a spring-loaded pin going through the strap which is holding on a larger metal piece.  You need to get another small pin (or an eyeglass screwdriver might work) so you can poke in the end of that spring loaded metal piece, which will allow you to slip off the larger metal bracer.  Then you can poke the spring-loaded pin entirely out of the strap and it will be freed entirely.  
To help you visualize what you are doing, the spring-loaded pin operates similarly to a toilet-paper roll - you need to compress the pin so you can slip off the larger metal bit, then take out the pin, which will free the strap.
Not finding what you are looking for?

105 views

Ask a Question

Usually answered in minutes!

Top Watches Experts

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39390 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...