Question about Directed 434MHZ Remote Control

1 Answer

I have a bell express vu remote that i am trying to get to work with one of your tv's. the remote is a 3.2IR the model number of the tv is 20pt634v37or 2opt634v37 can u please help me figure out wut the remote code is? so i can sit and not have to get up to watch the tv seeings i lost the other remote.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 24 Answers

1 - Hold the clear tv buttom until all 4 light flash red
2- Press the red tv buttom
3- Press the amount of time needed on the up cursor ( around select buttom) until your tv shut down
4-When the tv goes off press the search buttom ( at the end on the right side )
5-Press record

Finish :)

Then u can use the red tv buttom to control ur tv and u can control the volume on satelitte mode without going back to tv mode , if u press too much time while searching the code and the tv wont light back , do the same thing but instead pressing the up cursor press the down one to go back on the code it will be faster .

Posted on Feb 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a code number for a DAENYX TV ihave a remote philips brand number sru5107/27 All so will the remote for bell expressvu work for for HD expressvu the remote belongs to model 3200 express vu


I have provided instructions on programming the remote to your Dynex TV. I have included the codes for your TV. We do not have codes for the Universal remote. You need to contact Phillips to see if they have codes that you can use. I hope this helps.

Address remote to TV:

Remotes: Basic (Television Only)
  1. Turn the Television On.
  2. Press and hold the TV Power button for three seconds until the LED flashes.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press OK. Note: The LED will flash three times.
  5. Test functionality with the TV.
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Remote codes: 720, 115, 969, 111

Ray Calo
DISH Network

Apr 12, 2011 | DISH Network IR Remote Control

1 Answer

Remote problem


Considering that none of the so-called 'universal' remotes really are, I would guess 'no' and this remote was designed for a specific system so your chances are even slimmer.
Before buying ANY 'universal' remote, check the remote mfr.'s website for a code list for the specific model you intend to buy and make sure that the devices you wish to control are included in that model. If you don't do this in advance, you will likely be disappointed.
The code lists are 'burned' into an IC in the remote and the only type that can accept new code sets are the 'learning' remotes and they do a lousy job; I own one of these and it will not accept input from either of my later TV set remotes. 

Apr 14, 2009 | DISH Network IR Remote Control

2 Answers

I need remote codes for express vu remote fo my Hisense 22' TV


Try the following remote codes:
748
759

178
10019
505
627

Mar 21, 2009 | Bell Remote Controls

1 Answer

Need codes for bell express vu satellite for innovage products jumbo remote


Press and hold tv until red light flash , press code search , press channel up until the tv goes off , then press record and your done

Feb 10, 2009 | Big Button TV Universal Remote

1 Answer

Jensen JR400 remote codes


My sheet says the code for a Sony TV is:0000

What an interesting number... Hope it works for you. :)

Apr 12, 2008 | Jensen JR400 Remote Control

1 Answer

Home Theartes


Trying to program Toshiba remote CT90157 to work with my Koss KS-5116-2 DVD player... any suggestions ???????

Jan 12, 2008 | Remote Controls

1 Answer

Code for satellite bell (expressview)


Programming an Expressvu remote control can be frustrating. There are two basic ways of doing in it. The first one involves knowing both your TV brand name and also knowing the proper code to input in your remote. The second method is doing an automatic search. The following is a step by step procedure in how to program your dish network or Expressvu remote.

1)Make sure your TV and Satellite Receiver is ON.
2)Press and hold TV button until all lights on the side of it flashes. The TV button is the second button on the Top left hand side corner of the remote control.
3) Release that button, then press & release RED Button. You will notice TV button is stays on. If, it doesn't stay ON, you must repeat step 2 & 3. Otherwise, your batteries are low, you MUST change then.
4)Press and release the UP Arrow Key on the remote until TV turns off. Notice the UP arrow key button is the button below the volume keys (Stop button for VCR.)
5)Make sure you are aiming remote control to TV while pressing and releasing UP arrow key button. When you find the right code, the TV will turn OFF.
6) Immediately after, TV turns off, press # key.

Jan 03, 2008 | Remote Controls

Not finding what you are looking for?
Remote Controls Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Directed Remote Controls Experts

Cindy Wells

Level 3 Expert

4754 Answers

andy williard
andy williard

Level 2 Expert

226 Answers

John Miller

Level 2 Expert

253 Answers

Are you a Directed Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...