Question about Motorola Mobility RAZR V3c Cellular Phone

1 Answer

RAZR V3c in BOOTLOADER USB INIT mode DOWNGRADE failed

V3c by Verizon .I tried to downgrade from ..04 to...02 . It failed .Now it powers up with motorola BOOTLOADER USB INIT mode. Is ther a way to repair it ? my cell outomaticall goes to bootloader usb init and when I press the power ker it goes to hellomoto and bach to bootloder usb init

Posted by on

  • Anonymous Apr 16, 2009

    my pne says bootloader usb

  • Daniel Watkins
    Daniel Watkins Aug 18, 2013

    In my case a w755, if it just reboots and goes back to the bootloader usb init bluescreen no matter what, try tethering the phone to your computer and run 'motorola software update', it was able to connect, update/uncorruptify the software on the phone and now it works again!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 290 Answers

Reflash the original software. You can also take it to a Verizon store and they can do it for you.

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unlock


I should first point out that there are other options to unlocking yourself, since this option is a bit more involved and can seriously mess up your phone:

1) You can get the unlock code from your provider for free if they are prepared to give it to you. If they are then that is the safest and best option.
2) For $25, you can use TheMotoGuide's unlocking solution which is instant and guaranteed.



That being said, here's directions on how to unlock the phone yourself:

*You need to downgrade your boot loader to 7.D0, be aware that this can be risky.

* You may find afterwards that when starting in bootloader you have only a blackscreen, so long as the phone works ok and you can connect in bootloader that is nothing to worry about

* Ensure your phone is fully charged before starting. I recommend before beginning you first make a backup of your phone as described in the back it up section. Especially the PDS back up. This assumes all necessary drivers are already installed.

1) Start in bootloader mode (hold # and * while powering on)
2) Identify your current bootloader (e.g. 8.26 or 7.E0)
31-05-06_0118.jpg
3) If you already have bootloader 7.D0 skip to step 6

4) Download bl_826-828_to_07d0_for_V3_by_Archy.V2
5) Flash with this file using RSD Lite (described at the Flashing and Flexing section)

6) Download and extract the MOTO UNLOCKER SOFTWARE
7) Start in bootloader mode (hold # and * while powering on). In bootloader mode after the downgrade it is not unusual for the phone to show a blank black screen with no info, don't worry, though, it is still in bootloader mode!
8) Open up Moto Unlocker and connect you phone

unlocker.jpg
9) Run Moto Unlocker click connect and yes! Once finished it will look like this:
unlocker-done.jpg

Congratulations, your Motorola Razr V3 is now unlocked

Jun 13, 2010 | Motorola Mobility RAZR V3

2 Answers

I'm getting a bootloader usb init screen


Your phone is partly fried. It needs to be re-flashed. You can do it with a USB cable and the proper software....Google "bootloader USB" for some help in finding the software. One thing to try, hold down the "*" and "#" keys while powering up the phone, this could possibly help, but I doubt it.

Good Luck!!!

Apr 24, 2010 | Motorola Mobility RAZR V3c Cellular Phone

1 Answer

Verizon Razr V3 with locked screen. Verizon


yes ,down load p2k or another flashing utility,then flash your phone

Mar 11, 2010 | Motorola Mobility RAZR V3

1 Answer

What does bootloader usb init mean? my motorola ve240 says bootloader usb init. it happend out of no where and it doesnt work. help what do i do?


It means that your software for the phone has crashed and may possibly be corrupted. Try removing the battery and SIM (if applicable) while the phone is turned on. Reinstall battery and SIM and power the phone back on. If you still get the same error message, you'll need to visit a repair center to have the phone reflashed.

Jul 19, 2009 | Motorola Mobility RAZR V3c Cellular Phone

1 Answer

Motorola V3c will not power up.


USB INIT has failed on the phone you will need to take the phone to a professional mobile service center and have them fix it for you.

Aug 02, 2008 | Motorola Mobility RAZR V3xx Cellular Phone

1 Answer

Blue Motorola Log BOOTLOADER USB INIT ofter it got wet


that has been under water for to long so you should buy a new one.

Oct 10, 2007 | Motorola Mobility RAZR V3c Cellular Phone

5 Answers

Bootloader usb init razr v3m


motorola phone boot loader.
Software or the program of the phone has damage'
by using Smart Clip box you re program your mobile,
as they said the phone numbers, pics., songs, and video or all the files that you saved in your phone will be lost...

Aug 31, 2007 | Motorola Mobility RAZR V3m Cellular Phone

Not finding what you are looking for?
Motorola Mobility RAZR V3c Cellular Phone Logo

715 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

D. E. Hev

Level 3 Expert

1059 Answers

Lawrence Oravetz

Level 3 Expert

7686 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...