Question about Fisher and Paykel Fisher Paykel Intuitive Eco Washer IWL15

1 Answer

Code 49 and Manual Book

I have a Fisher and Paykel Intuitive Eco Washer and is displaying Code 49. I googled this and it said, could be the hot or cold valve. Replaced the hot valve as this was swollen, however washing machine still does not work coming up with same code. What else could be done as I don't have a manual for this machine?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

Fault 49 usually points to the cold inlet valve. I have come across many with this fault that the valve tests ok and it needs the motor controller replaced.

Posted on Jan 13, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: Error Code 49 on Fisher & Paykel Intuitive Eco

Fault 49 usually points to the cold inlet valve, either open circuit or not connected correctly. I often come across machines that the motor controller is the problem too.

Posted on Jan 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Intuitive Eco - code 49. What does that mean?


http://ths.gardenweb.com/discussions/2437709/fisher-and-paykel-wl26cw1-error-code-49

Here is a long quote from a repair man:

If the valve solenoids are reading 62 OHMS, and the contacts/connection at the main controller are in fact good, then all it can be after that is a faulty main controller Im afraid..

Here is the fault code and diagnosis for fault code 49, from the service manual, which also has a process of elimination,,

49. (00110001) Phase 2 to 6 - Cold Valve Faulty
The Motor Controller module has measured a voltage from the valve diagnostic
circuit that indicates the cold valve is faulty. The most likely cause is that the valve
harness has not been connected correctly or the valve is open circuit. See fault 48
for service procedure.

Now we go to fault code 48*

48. (00110000) Phase 2 to 6 - Hot and Cold Valve Faulty
The Motor Controller module has measured voltages from the valve diagnostic
circuit that indicate both the hot and cold valves are faulty. The most likely cause is
that the valve harnesses have not been connected correctly or the valve is open
circuit.

Primary Source: Wiring.
Action: Check the valve harnesses are correctly fastened to the valves or the pins are not bent backwards.
Secondary Source: Water Valves.
Action:
Check the valve coils are not faulty (open circuit).
Tertiary Source: Motor Controller module.
Action: Replace the Motor Controller module.

If all other avenues have failed, then it is the motor controller unfortunately**
Read more: http://www.justanswer.com/australia-whitegoods/6j82e-10-yo-f-p-iw711-intuitive-eco-washer-giving.html#ixzz3SvumWIpg

Feb 27, 2015 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Error code 49 f&p aqua smart wl80t65c


49 is a cold water valve fault. test the valve for voltage while filling, it should be recieving 24V. if not, the problem lies with the motor controller.

Aug 30, 2013 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

I have an Intuitive Eco Fisher and Paykel top loading machine. When I turn it on a continuous beeping sound comes on with the message Fault Code 49 apearing on the screen. What can I do to solve the...


Hi just read your posting.Error Code 49 means your Cold water valve is faulty,Or your control module is faulty.To test this fault you need an electrical test meter to test the water valve coil for conductivity.Have you or can you borrow a test meter to check the water valve?Please reply on how you would like to proceed and I am sure I can guide you throe the steps needed to rectify this fault.Looking forward to your reply.

Jul 27, 2010 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

I need service code 49


Hi just read your posting.Error code 49 means your cold water valve is faulty,The valves are located under the top panel.Do you help in the step by step testing of the valves?If you do please reply and I can help you rectify this problem.

Jun 26, 2010 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Code 49


it probably Needs a new cold water solenoid valve.

Sep 02, 2009 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Fisher & Paykel Intuitive Eco code 49....


code 49 is a faulty cold water valve fault code. If you replaced both the valves, the wires and plugs to them are ok and it's still not working then you need to replace the Main Motor Controller module, there's no way to reset this fault sorry.

PLEASE "rate my solution" thank you.

Steve

Mar 25, 2009 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Error Code 49 on Fisher & Paykel Intuitive Eco


Fault 49 usually points to the cold inlet valve, either open circuit or not connected correctly. I often come across machines that the motor controller is the problem too.

Jan 06, 2009 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Intuitive eco Fisher & Paykel


try google search for the actual model and fault code

Jun 04, 2008 | Fisher and Paykel Fisher Paykel Intuitive...

2 Answers

Error codes


We have an instruction manual but there are no codes.

Apr 15, 2008 | Fisher and Paykel Fisher Paykel Intuitive...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...