Question about Sony RDR-VX515 DVD Recorder/VCR

1 Answer

Need code for my dish network remote to operate sony decorder mod

Can't find the code for dish network remote to work for my sony dvd recorder model rdr-vx560

Posted by on

  • Anonymous Mar 13, 2014

    I am looking for a way to connect my cannon camera to my sony recorder. I am going from mini HDMI ging into the DV 4 pin on my recorder.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I had a device (I forget the brand name) but I could not find the code. There is a way to check all the codes one by one and it didn't take me very long. I can't remember exactly how to do it though. 
it was something like you enter this one specific code that allows you to keep trying to turn the device off and each time you try it will go to the next  code. When the device turns off you know you have the right code and you press a button to lock it in.
I did it through bright house but I would think that dish has something similar. I found it on the bright house website from the problem solving menu.  Try looking for something similar at the dish net website.
Hope that helped. Wish I could be more specific.

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote code


yes you need to read the manual

Dec 31, 2011 | Aspire Digital AD-1000 DVD Player

1 Answer

My dish network remote isnt working with my Sony Bravia LCD model KDL-40S5100


You didn't mention the model of the Dish receiver, so here are some common Sony codes. To reprogram the remote, press and hold the "TV" button on the remote until it stays lit. Enter one of the following codes and press "#". Check all of the functions. 500,640,652,756,758,781,783,795,796,797,798,806,807,837,844,845.

Apr 19, 2011 | DVD & Blu-Ray Players

1 Answer

I need the remote code can't find it i have a dish network universal any help would be appreciated.


We would be happy to help you with that. Here is a list ofcodes that should address your DISH Network remote to your Philips Magnavox DVD Recorder: 801, 766, 556, and 585.

Press and hold the DVD/VCR button located on the top of the remote until allthe mode buttons at the top of the remote light up, then release. Use thenumber buttons to enter one of the codes for your Philips Magnavox DVD Recorder, then pressthe pound (#) button. If the code entered is valid for the remote, the modelight flashes three times.To check that the code works try several different functions on the remote tomake sure it will properly operate your Philips Magnavox DVD Recorder. Keep in mind that somecodes may not be compatible with your equipment. If this is the case, try the other codes listed for that device until you find one that iscompatible with your equipment. We hope this helps and thank you forbeing a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Oct 01, 2010 | Philips Magnavox MWR10D6 DVD Recorder

2 Answers

Where do I find codes for Protron DVD recorder PD-DVR 100 for a Dish Network remote control


I hope that you have found the codes by now, but if not, here are the codes we have, and also the steps to program that remote.

1. Hold down the clear AUX button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the DVD on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

685 is the only code we have for this brand.

Becki Barned
DISH Network Customer Service

Sep 19, 2010 | Protron PD-DVR100 DVD Recorder

1 Answer

My remote broke and im trying to get the codes for it for my dish network remote. Do you know them ???


Sorry to hear about the original remote, we would be happy to help with getting your DISH remote programmed to your Curtis DVD player. Here is a list ofcodes that should address your DISH Network remote to your Curtis DVD player: 678, 679, 683, 585, 592, and 594. Start by pressing and holding the DVD/VCR button located on the top of the remote until allthe mode buttons at the top of the remote light up, then release. Use thenumber buttons to enter one of the codes for your Curtis DVD player, thenpress the pound (#) button. If the code entered is valid for the remote, the modelight flashes three times.To check that the code works try several different functions on the remote tomake sure it will properly operate your DVD player. Keep in mind that somecodes may not be compatible with your equipment. If this is the case, pleasetry the other codes listed for that device until you find one that iscompatible with your equipment. We hope this helps and thank you forbeing a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Sep 01, 2010 | Curtis DVD1047 DVD Player

1 Answer

Need code for Sony BDP-S350 for a Dish Network 622 remote


We would be happy to help you with that. Here is a list of codes that should address your DISH Network remote to your Sony Blu-ray player: 629, 671, 868, 617, 501, and 768.

Press and hold the DVD/VCR button located on the top of the remote until all the mode buttons at the top of the remote light up, then release. Use the number buttons to enter one of the codes for your Sony Blu-ray player, then press the pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. Phillip Chang
DISH Network Customer Service Representative

Aug 01, 2010 | Sony BDP-S350 Blu-Ray Player

1 Answer

Panasonic dmr-e55 need code to work with our dish. codes listed in dish network book won't work?? HELP


We would be happy to help you with that. Here is a list of codes that should address your DISH Network remote to your Panasonic DVD Recorder: 627, 614, 777, 633, 554, and 628.

Press and hold the DVD/VCR button located on the top of the remote until all the mode buttons at the top of the remote light up, then release. Use the number buttons to enter one of the codes for your Panasonic DVD Recorder, then press the pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. To check that the code works try several different functions on the remote to make sure it will properly operate your Panasonic DVD Recorder. Keep in mind that some codes may not be compatible with your equipment. If this is the case, please try the other codes listed for that device until you find one that is compatible with your equipment. We hope this helps and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Jan 22, 2010 | Panasonic DMR-E55 DVD Recorder

3 Answers

Code


I need a new remote control. My remote control just stopped working.

Dec 16, 2007 | kawasaki PVS-10921 Portable DVD Player

1 Answer

Universal remote codes


http://www.replacementremotes.com/vcrcodes.htm
go this site and serch for ur make and model remote
rate me solved if its helps

Nov 24, 2007 | Insignia IS-DVD1001 DVD Recorder/VCR

1 Answer

Finding a code


Look under Funai with dish network.

Nov 19, 2007 | Philips Magnavox MWR20V6 DVD Recorder/VCR

Not finding what you are looking for?
Sony RDR-VX515 DVD Recorder/VCR Logo

386 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96576 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Nasir Muhammad
Nasir Muhammad

Level 2 Expert

148 Answers

Are you a Sony DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...