Question about Zenith L30W36 30 in. LCD Television

Open Question

Can a zenith L30w36 LCD AV monitor still be used after Feb 19th ?

Also can a Tivo series 2 be used.
The monitor has been in use with a Tivo series 2 previously but in storage for a year or so and I now want to pass it on to friends but need to know if they will both work after Feb. The new owners have a Dish/satellite. Both monitor and Tivo were purchased around 2003. Thanks.

Posted by on

2 Suggested Answers

  • 1284 Answers

SOURCE: Would like a guru's assistance

They need to replace both sustain boards along with the power supply and the logic board. These are the common 4 for a LG/Zenith dead plasma that popped! Good luck.

Posted on Dec 06, 2007

  • 16 Answers

SOURCE: need owners manuel

Here you go; in pdf format.

Posted on Apr 04, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Zenith L30w36 backlight only

If it is back light only and no sounds or pic you possibly have power supply problem or main board.

Dec 03, 2012 | Zenith L30W36 30 in. LCD Television

1 Answer

My Tv isn't making any sound whatsoever. The tivo and the COmcast arnt working, but the BluRay is.

Are you using the HDMI for the Tivo and the Comcast box? If you do, then you need to verify that the HDMI sound set up at the boxes and at the TV are set to send and use the audio through the HDMI ports, not through the analog ports since HDMI allows you to use either analog audio or Digital audio through HDMI cable, you have to choose.
Please read the Tivo, Comcast box, TV setup for details.

Basic troubleshooting guide here:
Failed TV and Monitors pictures:
Learn about bad caps:
Capacitors kit: he can make you a set of caps.
Or just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Jun 25, 2011 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Zenith Z37LZ5D was fine till last week when I turned it on and after 2 minutes heard a pop and no sound or picture since then.

Sounds like a blow fuse for sure. Very cheap and easy solution.
Unplug it, open it up and look for any blown fuses (they're usually transparent cylinders). You'll know if they're "blown" if there is no wire going all the way across it inside the cylinder. If you find one, take it to Radio Shack, and they'll get you a replacement.

It's normal to be a little concerned about opening up a sophisticated, expensive electronic. If you're unsure about anything, please ask me. There are no stupid questions.

Mar 19, 2010 | Zenith L30W36 30 in. LCD Television

1 Answer

What cables do I need to use my monitor/tv?

I assume there is a series of AV inputs you can cycle through on the TV unit, the most definitive way to be sure, if your TV/Monitor has a tuner socket (the plug for the antenna) your unit will have a TV option on th AV input list. I hope this helps you. Good Luck.

Dec 05, 2009 | Olevia LT27HVX 27 in. LCD Television

1 Answer

What price is lcd moniter

Check or pricing.
20" LCD start at around $120 to $200.

Some (not just the higher-cost ones) have features like built-in speakers, USB hubs, height adjustment, screen rotation, etc.).

IMHO, Height adjustment is the most important "extra" (really).

2D/3D LCD's are on clearence ($199) everywhere (newer -expensive- technology coming soon)

Sep 24, 2009 | Zenith L30W36 30 in. LCD Television

1 Answer

I have an old Zenith L30W36 that wont show anything.

Most likely the TV has a power supply related problem. The most common thing to go out is the circuit board that supply power to the screen. Commonly called a Backlight Inverter Board.
I can't say it's 100% the problem because I can't actually look at the tv over the internet.

If you have some electronic experience, you can purchase a Service Manual over the internet and diagnose the source of the problem and fix it by soldering in the new part. The Service Manual will give you circuit diagrams, test points, and part# lists. Usually, cost under $20.

I hope I shed some light on the subject for you.

Jun 29, 2009 | Zenith L30W36 30 in. LCD Television

2 Answers

Polaroid TV remote control codes for Tivo

As I understand it, Polaroid TV's sometimes work with the Mitsubishi codes. You may give this a try. You may also e-mail Polaroid direct at contact page to find out what codes should be used (may match a different manufacturer)

Jan 27, 2009 | Polaroid 4226TLMB 42 in. LCD TV

2 Answers

Flat screen zenith Z20LCD1 use as a moniter HOW? Thanks

this is from the manual:

When the input source is PC (Only for Z15LCD1)...

PC S ettup ((Z151L5CLC1RD1
1. Set the monitor output resolution on the PC before connecting to the TV.
2. Connect the TV to the PC with the PC cable.
3. Connect the PC audio output to the TV's PC S OUND input.
Viewing Setup
1. Turn on the PC.
2. Use the PC b utton on the remote control to select PC .

it appears only the 15" model may be used as pc monitor

Dec 06, 2008 | Zenith Z20LCD1 20 in. EDTV-Ready LCD...

1 Answer

Directv Tivo recorder no remote programming code for Visio 37''

If it were a Tivo series 3 you might have better luck with it.

I've had my series 2 Tivo for about 2 1/2 years and never found the correct codes for it. I think it works off of a list of TVs manufactures about 3 years ago.

Nov 22, 2008 | Vizio L37 Television

3 Answers

Tivo Remote

I found this usefull tip on the Tivo website. Here is the link for the page. I hope it works for you.

Feb 23, 2007 | iLO V27DMBX Television

Not finding what you are looking for?
Zenith L30W36 30 in. LCD Television Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71182 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2278 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides