Question about Nikon Coolpix L11 Digital Camera

1 Answer

Flash doesn't work

The flash fails to work. The result: all the pictures taken are too dark.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 36 Answers

Check first to see if your flash is shut off. If it is turned on and you still get no flash then you need a new flash pcb. You are probably looking at around $125 to have a camera repair shop do this.
Hope this helps.
Wes

Posted on Jan 06, 2009

3 Suggested Answers

  • 497 Answers

SOURCE: dsc-t1 pictures taken inside are dark. Flash is

There may be the issue with the CCD (image sensor device) of the Camera.

Refer this article to confirm this.

http://esupport.sony.com/US/perl/news-item.pl?mdl=DSCT1&news_id=161

Check whether the LCD screen of the Camera looks similar as given on the page.


If yes,click on the "Yes" button at the end of the page to create an onlineRepair Request for sending the Camera to the Sony Factory ServiceCenter.


Posted on Aug 31, 2009

old marine
  • 1815 Answers

SOURCE: The flash and picture are out of sync.

If your flash has worked properly in the past, the camera may need to be serviced. If your subject is within 6 - 8 feet and is not being properly illuminated, something needs to be adjusted or replaced.

By specification, your flash will only adequately illuminate subjects out to 14 feet (wide angle) or 10 feet (telephoto). If you're trying to shoot subjects further away than that, the flash is not bright enough.

Posted on Dec 28, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The flash on my Panasonic DMC-FZ100 doesn't work, I've tried 'forced flash' and thats not working either?


Hello Ray, This is not something a user wants to attempt !!! The camera really needs to be repaired by a tech. You will do more harm than good by trying to fix it yourself and will cost even more if you damage something.

Best Regards, Russell

Jan 22, 2013 | Panasonic Lumix DMC-FZ100 Digital Camera

1 Answer

No flash. pictures are dark


My Kodka M530 is only taken dark pictures, I cant get the flash on, and if I get it on it still wont stay on. The pictures still coming out dark

May 18, 2010 | Kodak EasyShare M530 Digital Camera

2 Answers

The flash and picture are out of sync.


If your flash has worked properly in the past, the camera may need to be serviced. If your subject is within 6 - 8 feet and is not being properly illuminated, something needs to be adjusted or replaced.

By specification, your flash will only adequately illuminate subjects out to 14 feet (wide angle) or 10 feet (telephoto). If you're trying to shoot subjects further away than that, the flash is not bright enough.

Dec 28, 2009 | Canon PowerShot A630 Digital Camera

2 Answers

Pictures too Dark


Try resetting the camera. Go into the setup menu and find "reset".

Sep 21, 2009 | Canon PowerShot A630 Digital Camera

1 Answer

Dark picture of furniture with flash


set the lighting settings and the flash settings to auto. you will be able to get an optimal picture everytime.thanks for using fixya! please dont forget to rate my solution.

May 29, 2009 | Olympus C-3000 Zoom Digital Camera

1 Answer

Pictures turning out dark, LCD not adjusting


CCD sensor problems usually present themselves as either a blank image, purple cast, or lines through the image. Incorrect exposures are usually a result of the lens shutter failing to open and close correctly. Typically, the lens is not servicable and they need to be replaced.

Apr 13, 2009 | Canon PowerShot A95 Digital Camera

1 Answer

Canon eos 300d - image to dark


Try lithium batteries or rechargables in the 2500mah range,to me they seem to work best in a flash.
If you use alkalines,use a well known brand.But with alkalines,as they loose power it takes longer for the flash to recycle.
Also the monitor might need to be calibrated or adjusting brightness and contrast.
Mine sometimes does the same thing,I just use Photoshop to adjust it.

Jan 16, 2008 | Canon Digital Rebel / EOS-300D Digital...

1 Answer

Why do some of my pictures come out dark or with shadows?


Your Polaroid Fun! Digital 320 camera does not have a flash. If pictures are coming out dark, it's because there wasn't enough light in the surroundings when the picture was taken. Remember, it's important to take photos in brightly lit surroundings. When taking pictures indoors, make sure that the room has bright lighting. For best results, take pictures during daylight hours with a combination of indoor and outdoor light, preferably near a window.

Sep 21, 2005 | Polaroid PhotoMax Fun 320 Digital Camera

Not finding what you are looking for?
Nikon Coolpix L11 Digital Camera Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

Ric Donato

Level 2 Expert

225 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...