How to clean star tsp800 printer - Star Micronics TSP800 Thermal Printer

Indicating "Star Wheel Motor" error, Perform the Scan Axis Starwheel diagnostic test,Entering in Service menu: hold the Up arrow key and the OK key down andswitch the printer ON using the front power switch. Wait until the LED of thepower switch stops flashing (usually after 5 seconds) before releasing ALL Diagnostics menu,go to scan axis, enter,go to star wheel lifter,press OK.. complete the mode..if fails remove star wheel are clean all gears refix again, do the diagnostic again..if you have manual that better to process the things.. Best of luck

try to go to printer prferences...star/printer and devices/right click the printer icon/ printer prferences/maintenance/click clean head cartridge.

Dear Star Customer

It sounds like you have a hardware issue. Please open the lid and take a photo of inside the printer and forward it to us at [email protected], it will help us find out what the problem it.

Best regards

Star Support.

Star Wheel Motor has a problem.
01 code says "reseat/reconnect/clean and manually adjust" the motor.
The Star Wheel Motor is on the left side of the printer.
If you arn't trained on it, get someone who is, to service it.

hello, have you cleaned the thermal head with isopropyl alcohol, and a soft cloth, according to user manual, this should be done, being gentle with it.

1. Define your Star Micronics Printers device model TSP600
2. Define your operating system to install your Star Micronics Printers device
3. Search Printers driver category
4. Find Star Micronics Printers driver
5. Select Star Micronics TSP600 Printer Network Setup Utility Ver. 2.0.1 Windows XP, 2000, ME, 98, 95
6. Download Star Micronics TSP600 Printer Network Setup Utility Ver. 2.0.1 Windows XP, 2000, ME, 98, 95
7. Install Star Micronics TSP600 Printer Network Setup Utility Ver. 2.0.1 Windows XP, 2000, ME, 98, 95
8. Restart or reboot your computer to finish your driver installation.

Download here:

http://www.opendrivers.com/driver/247183/star-micronics-tsp600-printer-network-setup-utility-ver.-2.0.1-windows-xp-2000-me-98-95-free-download.html

The problem is either in the toner cartrige or in the drum unit. Check both items or may be all in one cartridge. Try replacing.

try cleaning the print thermal bar with rubbing alcohol

pry off the control panel, remove the scanner cover, remove all the screws (usually star type) then the whole top section should come off. You should clean the scanner mirrors while you're in there.

Star TSP800/TSP700/TSP600 Printer Driver Windows 2000/XP v0.3.1281.6
LINK: http://www.downloadsource.net/9374/Star-TSP800-TSP700-TSP600-Printer-Driver-Windows-2000-XP/

GO DOWN TO HALF OF THE PAGE AND YOU WILL SEE AN ORANGE DOWNLOAD BOTTON CLICK ON THAT!