Question about Hotpoint Aquarius WD640 Front Load Washer/Dryer

1 Answer

Error code f-01 on hotpoint washer dryer aquarius model wd 640

Machine drains but does not spin just flashes error code f-01

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 100 Answers

F-01 means there is a motor problem.
may be the motor and/or the circuit board that controls it.

Posted on Feb 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint aquarius is not spinning or draining..f-05 is flashing on and off...


Error code F05 indicates pressure switch jammed on full.
Remove lower rear panel of washer.
Remove large black hose on bottom of drum
Remove and clean filter inide hose.
Refit and test.
Please rate my solution.
Thankyou.

Jan 31, 2010 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Aquarius WD 640 showing F- 12 what does this mean


F12 means a communication error between boards.
Check all connections to and from boards.
Hope this helps.

Jan 14, 2010 | Hotpoint Aquarius WD640 Front Load...

1 Answer

My hotpoint aquarius washing machine wd 640 is showing the fault h2o


The code h20 indicates means (not filling)
check the tap/s, hoses, and water inlet valve/s.
Please leave feedback.
Thanks.

Nov 12, 2009 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Hotpoint aquarius WDL520 all lights flashing not spinning water still in bowl cant find instructions only bought it at xmas


There should be a small door at the front bottom of the machine, open it and unscrew the plunger. try that first as there could be a blockage.

The machine will not spin until the water is drained out.

Jun 17, 2009 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Error code f-01


This motor does not have brushes fitted, the error code F01 indicates that the motor triac has shorted, this is part of the electronics that control the motor, it could possibly require a new main pcb, and/or new motor. If it is under 5 years old, then you are better off contacting Hotpoint, and getting it done under the 5 year part guarantee.
Plz rate my solution.
Thanks.

Jan 05, 2009 | Hotpoint Aquarius WD640 Front Load...

2 Answers

E30 error code


Error E30 is a motor drive problem. Would check motor brushes as most likely fault.
Thanks for using Fixya.

Dec 16, 2008 | Hotpoint Ultima WD72 Front Load...

1 Answer

AQUARIUS HOTPOINT WD440


How many times does it flash.
it still sounds like you have an obstruction in something.

May 09, 2008 | Hotpoint Aquarius WD640 Front Load...

2 Answers

Aquarius Hotpoint WD440. 1400 Spin


The next step should be the pump out. If it is not pumping check your pump filter for obstructions. Check the drain hose and also your drain in the wall. If all are clear you may have a bad pump. You should have an error code coming up when the machine stops also, please let me know what it is. Thanks and I hope I can FixYa.
Mike

May 09, 2008 | Hotpoint Aquarius WD640 Front Load...

Not finding what you are looking for?
Hotpoint Aquarius WD640 Front Load Washer/Dryer Logo

805 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...