- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
What is the error message? The CPUs will not overclock on there own, that requires configuration. Some components when not installed properly with cause the computer to boot to a black screen and the fan to speed up dramatically. I've seen memory sticks and display port cables cause this. Check all your hardware and make sure everything is seated properly.
I've seen issues like this with a bad hard drive. When entering the bios it queries the hard drive first and it's got issues it can hang it up like this. If you have a spare try that. You can try to boot it without a hard drive to see if it gets past this. Some computers won't boot without a hd though. If you've got another computer you can look around online to make a flash drive bootable and use that instead of your hard drive. Lastly, get a new hd.
It's getting power, it's just not getting signal from the data cable. The cord that connects to the monitor, (not the power) is typically the reason it is going into standby mode. This can also happen if your graphics card driver is missing on your operating system, but you said you tried the monitor on another machine, so I narrowing it down to most likely be the data cable. Try another cable.
go download this grate Autorun tool: http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx start it >go to internet explorer tab> find Myfreez lines and delete them also delete Myfreaze line from logon tab if any