Question about Sabrent SBT-WCCK Webcam

1 Answer

MY MIC DONOT WORK - Sabrent SBT-WCCK Webcam

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video should work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't seem to get my microphone to work. Every other sound is working.


You do not say what sort of mic you have - if its a built in laptop mic, a standalone mic or one built into the webcam.
It would also be useful to know what your OS is and what chat program you want to use the mic in
However we can generalise and hopefully put you on the right track

Have you set the mic you wish to use with your webcam as Default ?

XP
Plug in your webcam or headset or mic you wish to use with your webcam
Control Panel (Classic View)
Open 'Sounds and Audio Devices' folder and click on the 'Volume' tab - make sure the speakers are not muted, open 'Speaker volume' and set the sliders toward the upper end.
Open 'Audio' tab - make your preferred mic the default device in the 'Sound recording window'
Open 'Volume' below the window to ensure the mic is not muted
Click 'Apply' and 'OK'
Restart your computer
Configure the webcam / mic to your chat program

VISTA
Plug in your webcam or headset or mic you wish to use with your webcam
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
Right click on the volume graph and select 'Show disabled devices' and 'Show disconnected devices'
To set your preferred mic as default - click the mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure your webcam and mic to the Chat program

Aug 31, 2010 | Logitech Webcam

1 Answer

My webcam works fine on other websites but when i try to talk nothing happens. It works fine when i test it but not on websites


You need to set the mic you wish to use with the webcam as the 'Default' mic

XP
Plug in your webcam or headset or mic you wish to use with your webcam
Control Panel (Classic View)
Open 'Sounds and Audio Devices' folder and click on the Audio tab - make your preferred mic the default device in the 'Sound recording window'
Open 'Volume' below the window to ensure the mic is not muted
Click 'Apply' and 'OK'
Restart your computer
Configure the webcam / mic to your chat program

VISTA
Plug in your webcam or headset or mic you wish to use with your webcam
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
Right click on the volume graph and select 'Show disabled devices' and 'Show disconnected devices'
To set your preferred mic as default - click the mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure to your chat program

Aug 25, 2010 | Logitech QuickCam Fusion Webcam

1 Answer

The sound wont work at the same time with picture


You may be using a laptop with a mic as well as having a webcam with a mic.
Try setting the webcam mic as default.
Vista
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure webcam to your chat program

Jun 09, 2010 | Dynex DX-WC100 Webcam

1 Answer

Webcam: Iv been trying to use chatroulette and cant seem t...


Its important to set your webcam mic as default (the one you want to use) especially if you have a laptop with a built in mic as well

TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders (adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

May 05, 2010 | Mri WebCam

2 Answers

Sound won't work


make sure the webcam mic is set as default - especially importsnt if you have laptop with a built in mic as well
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure to your chat program

May 02, 2010 | Logitech QuickCam Communicate STX Personal...

1 Answer

Other person cannot hear me


You are in a situation of having 2 mics
Make sure the webcam mic is set as default
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

Configure mic to your chat program

Apr 28, 2010 | Logitech Webcam

1 Answer

Im a new user on tinychat, my webcam works fine but haven't figured out how the mic thing works, Im using a desktop & not a laptop so now built in mic


plug a mic with ur pc first then right click on ur volume icon click on recording devices and set ur mic status

enjoy...

Nov 27, 2009 | Logitech Webcam

1 Answer

Mic


first u check whether your mic is correct, try to plugin some other pc where mic is working in good condition,

if the new mic is working properly on another pc then

Re install your sound card Driver, and try

Cheers

Nov 30, 2007 | Philips SPC 200NC Webcam

3 Answers

Minicam pro 98067


hi catney this is nichu,donot worry. even if you have lost the cd you can work with your webcam by downloading the software from the internet from this website for free http://forums.windrivers.com/showthread.php?t=74972

or
http://jascoproducts.com/support/software-downloads.asp#pccams

stay cool
take care & have a nice day
bye.

Nov 08, 2007 | GE EasyCam Webcam

Not finding what you are looking for?
Sabrent SBT-WCCK Webcam Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sabrent Webcams Experts

Teet Bergmann

Level 3 Expert

565 Answers

Roshan Rijal
Roshan Rijal

Level 2 Expert

361 Answers

vimal
vimal

Level 3 Expert

328 Answers

Are you a Sabrent Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...