Question about Sharp AR-5320 Black and White Copier
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Man mean maintenance signal.
Reset : # - Interrupt - C -interrupt press 14 press start key.
If you are not fix try next way.
# - Interrupt - C -interrupt press 16 press start key.
Posted on Jan 27, 2010
SOURCE: Ar 5516 display H4 error
This means that the fusing unit has a problem. Turn off the copier. Open the small side cover on the right of the fuser unit. You will see the wire connectors leading from the unit and carefully remove them.Open the three screws holding the unit and remove it, check the heater lamp continuity if out replace the lamp. Clean the thermistor and return the unit by reversing the removing process. Now try the code and it will work.
Posted on Mar 30, 2010
Perform the following procedure to enter the simulation mode.
"#" key Interrupt key "C" key Interrupt key
press 14 and start key twice.
copier should restart normaly.
If not, then you have problems with the fuser, contact me to tell you what you have to do next.
Posted on Nov 05, 2010
Testimonial: "thanks a lot it was very helpful"
Tips for a great answer:
Apr 25, 2017 | Sharp Office Equipment & Supplies
Apr 24, 2012 | Sharp AR-5516s
Nov 16, 2011 | Office Equipment & Supplies
Oct 09, 2011 | Sharp AR-5316 Advanced Digital Imager...
Sep 20, 2011 | Sharp AR-5316 Advanced Digital Imager...
Jan 10, 2011 | Sharp AR-5316 Advanced Digital Imager...
Aug 27, 2010 | Sharp AR-5316 Advanced Digital Imager...
Aug 22, 2010 | Sharp AR-5320 Black and White Copier
Aug 20, 2010 | Sharp AR-160 Copier
Nov 07, 2016 | Sharp AR-5320 Black and White Copier
21 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: