I need to download the software for the uniden wireless surveilance cameras udw20055. I am using a windows 7 notebook and can't run the little cd as the notebook doesn't have a cd rom. Thanks Geraldine

http://www.blogbyben.com/2015/05/how-to-pair-uniden-udwc23-camera-with.html

http://www.manualslib.com/manual/184563/Uniden-Udwc23.html

http://www.mycusthelp.net/UNIDEN/_cs/AnswerDetail.aspx?sSessionID=&aid=340563

The camera is not a stand alone system. It is designed to work with the rest of the surveillance system, in this case the Uniden UDW10003 and UDW20055 Video Surveillance Systems. The surveillance system has software for reviewing footage and that software is clearly for a PC rather than a phone. The service department may be able to advise you further regarding the tablet, given there is a wireless feature to the surveillance system.

Shows a standard adapter provided , what is the pc input on the back of your pc look like

Should be blue in jack

Uniden UDW20055 Owner Manual


pc sound in jack Bing images

Does it power up at all? Check the voltage on the transformer. If the power is good it is probably the unit and needs to be sent back for repair.

Not sure about software, but you can download the manual here -
http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/UDWC25om.pdf

free software download at www.uniden.com (see support link)

http://my.uniden.com/downloads.cfm?product=UDW20055

The above link is for UDW20055. Might work???

Its on the back of the receiver. If your using Windows 7, don't forget to download the updated software..

Disconnect the receiver. Download & Install the following application: http://www.uniden.com.au/RESOURCES_MAIN/software/UWS1000_PC%20Software_Install.exe

You need to hook this unit up to a computer to record and install the optional software that came with it....you can then set up record times, intervals, etc... Good luck.

I was wondering the same thing. Have you talked to Uniden or Lorex about this?

I was having the same problem, and the answer is a little tricky, but should work fine. You need another computer running xp or vista. Go to the other computer, then install the software from the included disk. Download Drivermax (http://www.innovative-sol.com/drivermax/index.htm) and install it on the xp/vista computer. Then, plug the receiver unit into the xp/vista computer, and wait for the hardware to be installed. Once the receiver is installed (you can test this by running "Uniden Surveillance System" and turning on a camera), leave the receiver plugged in and run drivermax. Click on "Backup Drivers" under "Driver Backup and Restore". Click next, and wait for it to list all of your devices (this could take a while, depending on your devices). When they have all listed, scroll through the list until you see "Wireless Digital Camera" or similar. Check the checkbox next to that, and click next. Save the file on a usb drive and disconnect the receiver and the usb drive with the driver on it. Go to the Windows 7 computer, and make sure the Uniden Surveillance System software is installed. Plug in the receiver and wait for windows to try to install the software. When it shows the error, go to printers and devices, and double click the icon for the receiver, under the unrecognized category. Click troubleshoot, and it will try to figure out the problem. Once it asks you where to look for the driver (Windows Update or a file on your computer), click the option for the file on your computer, and browse to the folder on your usb drive. Continue, and it will search the folder for the files it needs. For me this took a while, but wait for it to finish installing the driver. Once it does, you're done! Start up the software and try out your camera!

This worked fine with me, using an XP driver on a windows 7 netbook.