Question about Euro-Pro EP1005 Iron
The steam is working, but the steam light does not come on. The heat light works. The suction table still works. The steam drips.
You may not need a new iron, my wife's iron is doing the same thing. take the top of the ironing board off (you will need a torx t-20 security bit driver), under the tank is a connection that may have rusted out re-connet it and turn the iron on. Once it heats up, check the tank for leaks. The tank may need to be replace as well or try a 5-minute epoxy type glue on the leaks once it has cooled. If the tank leaks you will get not get enlugh pressure building up to get the steam.
Posted on Jan 05, 2010
Tips for a great answer:
May 29, 2016 | Euro-Pro Irons
Jun 23, 2010 | Euro-Pro Steam Generator EP8001 Iron
Oct 27, 2009 | Euro-Pro EP1005 Iron
Jan 21, 2009 | Euro-Pro G6118 Iron
Jun 19, 2008 | Euro-Pro Steam Generator EP8001 Iron
May 18, 2008 | Euro-Pro Steam Generator EP8001 Iron
Feb 02, 2014 | Euro-Pro EP1005 Iron
118 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: