Question about Zebra ZM400 Thermal Label Printer - ZM400-3001-3000T

Open Question

Getting a Error cleared error. What do I do? - Zebra ZM400 Thermal Label Printer - ZM400-3001-3000T

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F21 and SUDS code on Kenmore Elite 5t Steam Washer. It was not the drain line. I replaced the pump and still getting error codes


Are you using the "HE" detergent? Also, don't use to much as it will cause the SUDS error.

Oct 15, 2012 | Washing Machines

1 Answer

Getting H3 error message Sharp AL 1631 copier


H3 is a heater/fuser problem. Try to reset it by SIM 14. Press Clear , auto exposure, Clear and auto exposure and press copy key. check if H3 has been reset and LED is back to "00".

Oct 29, 2009 | Sharp AL 1631 Copier

1 Answer

Getting a red ''wrench'' symbol, spits out blank page when making copy, error message to turn off/on main switch which we have done, but doesn't clear the error. The red ''wrench'' symbol keeps coming...


Press "clear/stop" and "8" at the same time. An error code will be displayed as long as these two buttons are held down. What is the error code? Let me know, please.

Sep 01, 2009 | Lanier Office Equipment & Supplies

2 Answers

Im getting error e000000-0000


ok the Error code is to do with your fixing unit, you need to go into service and clear the error then reset machine should work again.
do a search for clearing fixing unit error code on your canon copier, wont be to hard to find
canon copier tech

Mar 30, 2009 | Canon imageRUNNER 3300 All-In-One Laser...

2 Answers

Sharp AR-M160 H4 error code


Clearing a trouble code on a AR-M160 is a little different than the AR160.

Try "#" "interrupt" "clear" "interupt" "1" "4" "start key"

This should clear the error. Even if you replace the fusion unit you will need this code to clear the error

Oct 26, 2008 | Sharp AR-M160 Laser Printer

2 Answers

Getting a eooo mesage


E000 error is due power surge or electrical fault within the copier. you can clear the error in service mode.

Sep 30, 2008 | Canon imageRUNNER 1630 Copier

1 Answer

Fix system error


Hi,
Please click on the below link or copy the URL and paste it in your web browser. Follow the steps..
http://support.lexmark.com/perl/support/support.cgi?ccs=229:1:0:93:0:0&docid=ENUS547
OR

If you are getting any type of 'CLEAR SYSTEM ERROR' on the LCD screen of the printer, please follow these steps:
1) Remove the power cable for 2 minutes and the USB cable from behind the printer.
2) Press and hold down the stop clear button and reconnect the power cable back to printer.
3) The printer LCD screen should clear the memory error.
4) If the same error message persist on the LCD screen, please follow the instructions below.
5) Unplug the power cable for 2 minutes and USB cables from behind the printer and open the printer cover and remove both ink carts.
6) Repeat step 2 and Install both cartridges then the screen will display Cartridge's clean, press start.

Thank you........

Sep 28, 2008 | Lexmark X63 InkJet Printer

3 Answers

I keep getting error codes


i am getting error E000001 -0010

Sep 16, 2008 | Canon imageRUNNER 5570 Copier

Not finding what you are looking for?
Zebra ZM400 Thermal Label Printer - ZM400-3001-3000T Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

pkwc

Level 2 Expert

254 Answers

Dave Busselle

Level 1 Expert

54 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...