Question about Dacor ECS130 Epicure Electric Single Oven

7 Answers

ECS130 - Possessed Oven

I have the same exact problem posted from Oct 2006. Lights turning on and off at random, etc... Is there anything reported from DACOR saying this is a recall problem? How was it finally fixed and how expensive was it? Did you have to replace the entire touch pad or was the a less expensive solution?

Posted by on

  • 9 more comments 
  • kaplan88 Dec 27, 2007

    oven light turns on and wont turn off at random.

  • Obsessed Jan 01, 2008

    I have the same trouble with the Dacor ECS127SCH. What's the fix?

  • gansito Jan 04, 2008

    Persistent, erratic on/off of oven lamp since '01 install. At $270 quote from authorized rpr, decided not to rpr. However in '07 could not correct with reset of lamp touchpad...halogens burned out from overuse. My unit DID NOT HAVE a 4a fusible link between relay and relay board (an option on wiring schematics), and 10w replacement halogens not available in my area. Replaced with 2 20w halogens...and blew relay.

    Dacor said that they'd cover elect. parts and I pay rpr costs.

  • whatsituya Jan 21, 2008

    The light constantly strobes at a furious pace--we wish it would just burn out and we would do without the light. as it is, we turn of the circuit for the ove. we already had a 300 repair of replacing the control panel because the door was left open in the traditional broil position and later found out you're not supposed to do that. Not very happy with Dacor, to say the least.

  • Anonymous Mar 28, 2008

    We have the same exact problem with the lights randomly turning on and off at a high rate of speed. Also, our temperature probe has never worked.

  • Anonymous Mar 31, 2008

    same oven light with model mcs 130.

  • Anonymous Apr 18, 2008

    Same problem...this unit has had other problems like not heating up to desired temperature (had it serviced out of pocket, and then I learned the trick to reset button in upper section...still experimenting on a solution on the light problem -- already spent a lot on service for THIS DACOR and a matching DACOR microwave.

  • Rodroost May 17, 2008

    Oven light switches off and on at a rapid rate.

    We've turned off the circuit but lose the clock

    and timer as a result. Seems like Dacor should

    have a solution. This is our second Dacor oven.

    We traded for the second after the first Dacor

    developed electrical problems.

  • Anonymous Nov 12, 2008

    the oven light switches on and off up to about 30 times a second, then slows down kind or random like. I figured it was a defectifve membrane switch so I ripped it apart and cut the printed circuit trace to the light membrane switch. Now I have no light but at least I can leave the power on without going insane.

  • bobbhansen Dec 17, 2008

    the oven light started chatter almost a year ago. We use the breaker to switch it on and off.   We also have a cooktop from dacor that comes on and off as it pleases.  My brother in law had a dishwasher that went crazy.  Dacor replaced that one.   This company should issue recalls if they are going to charge the money for the products they should back them up.  I won't buy their products again.

  • psjcrunco Apr 16, 2009

    The lights are going crazy--on/off! What can be done?

×

Ad

7 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

This happened to my oven and we had to replace the control panel membrane for $367.00 and it fixed the problem.  Since then the electronics on the clock went and this repair is $550.00  for a clock!! Needless to say I turfed the oven, and purchased another, but I kept the new membrane.  If anyone wants it (6 mo old) you can let me know.

Posted on Apr 06, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The convection mode to my electric dacor oven keeps turning off during cooking times

Posted on Dec 12, 2008

Ad

I got Dacor to replace both motherboard and the board with the lamp relay for free parts only (ie, I paid the service call). Since this is a known and persistent problem, Dacor should have sent out a recall on this and not wait secretly in the background for complainers to emerge. Had they contacted me in '01, '02, '03,...., I'd have more respect for the company. Also, they should have covered the service costs on their dime.

My Bobcat was well past warranty, but certain manufacturing and design flaws became apparent on my machine yrs later and Bobcat went to significant effort to give me a fully corrected machine. Why not Dacor?

Note the 10w...not 20w...halogen lamp replacement. If you install a 20w into the unit, and if it is not fused (per some models) as mine was not fused, you burn out the icecube relay.

By the way, the reset button (which disables the heating coils) is poorly and dangerously located behind several live components in a 2 1/2" space. The last time that that tripped, I moved it to the FRONT of its cabinet and screwed it back in. Now I can reset without a) Electrocuting myself if too lazy to shut the breaker or b) Not having to run to the basement to hit the breaker during reset. This relocation of the reset button can be done without removing oven from wall, but far easier if removed.

Posted on Oct 24, 2008

Based upon what solutions 2 and 3 suggested. I was able to simply disable the light and chattering relay by disconnecting the 1 inch wide mylar ribbon connector from the bigger circuit board.

It is the smaller of the flat cables that comes out of the back of the control panel and attaches near the left side of the bigger circuit board.

The light doesn't work but it's a good enough work around if you don't want to part with the money.

Posted on Oct 24, 2008

I had the same problem. I called Decor in CA and told them they had a design/product problem. they said they were aware of the problem. I asked them to send me a replacement assembly and they agreed. It's easy to remove and replace if you can use simple hand tools and know how to work on equipment without getting electrocuted.

San Diego

Posted on May 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I replaced the membrance panel and wal-law it worked.
Cost about $180.

Posted on May 23, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The fix is replacing the mebrane panel. Recent poster advised they where able to get Dacor to send a new panel and they would install (it's not difficult). I bought one online for around $175 and installed myself. Do a search for details.

Posted on Jan 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't use my oven it keeps turning off and my oven is beeping and the problem light is flashing how can I fix this so I can use my oven


Kenmore electric oven keeps shutting off.... ' Sears PartsDirect

www.searspartsdirect.com > Ask an Expert
Oct 15, 2010 - Kenmore electric oven keeps shutting off. ... Can't locate your model number? Use ... hi, i purchased and replaced my etc (#316455420) for kenmore electric range model # 790.9011.2010. i was ... How to use the site (3:58) ...

Frigidaire oven Bake functions randomly beep and shut off ...


Dec 25, 2015 | Ovens

1 Answer

I hav whirlpool accubake.oven wont stay lit.it ignites then flame goes right back out


Whirlpool oven won't light - Appliance Repair Forum

forum.appliancepartspros.com/oven.../225907-whirlpool-oven-wont-lig...

May 19, 2011 - 10 posts - ‎2 authors
I have a Whirlpool Accubake oven (SF362LXSS0) that doesn't seem to be consistently turning on, and the problem's getting worse. ... If I try to turn it on to bake, I hear several clicks, but not that "gas oven turning on" sound and no heat comes out (but a slight smell of gas is ... Whirlpool Gas Oven won't stay lit
1 post
Oct 25, 2012
whirlpool oven won't stay on
1 post
Aug 13, 2012
Whirlpool Gas Oven Will Not Stay Lit
2 posts
Jun 20, 2012
whirlpool accubake oven will not stay lit
1 post
Nov 9, 2009
More results from forum.appliancepartspros.com

Whirlpool Accubake Model # GW395LEGQ4 - Oven won't Start ...


Dec 12, 2015 | Stoves Ovens

1 Answer

Power was turned off. I reset the clock to proper


We have the exact same problem. It doesn't heat to above 135. Help!!

Jan 13, 2010 | Dacor ECS130 Epicure Electric Single Oven

1 Answer

My jenn air dual oven timer, temp lights are going out


Sounds like another control board failure, common on this type oven. It appears that a capacitor (#C3 on board) overheats and goes bad. Replacement of cap is a simple soldering job but the caps can be hard to find, try electronics parts houses and explain you need a high temp replacement. Should cost you about a buck. See post by Briangem back in may of 2008, who turned me on to the target cap. Its a 35Volt 86mF.

Apr 29, 2009 | Jenn-Air JJW9830D Electric Double Oven

1 Answer

Beeping wouldn't stop, now it's dead.


F7 means you relay board is bad, you need to replace it.

Jul 23, 2008 | Dacor ECS130 Epicure Electric Single Oven

1 Answer

Dacor oven


Faulty temperature select. How old do you think the unit is ?

Nov 24, 2007 | Dacor ECS130 Epicure Electric Single Oven

1 Answer

Another posessed Dacro ECS130


I have the same problem and called Dacor yesterday and they know of this general problem and the fix is a new membrane. I told them this was a factory product defect and ask for a membrane to be sent to me at no charge. They agreed and I will change the membrance myself.

Oct 07, 2007 | Dacor ECS130 Epicure Electric Single Oven

Not finding what you are looking for?
Dacor ECS130 Epicure Electric Single Oven Logo

425 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dacor Ovens Experts

Vitaliy Gins
Vitaliy Gins

Level 2 Expert

78 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Jose Pino

Level 3 Expert

563 Answers

Are you a Dacor Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...