Question about Sewing Machines

Open Question

Foot pedal on toyota serger making crackling noise

My foot pedal on my toyota serger is making a crackling noise when I use it , what could be causing this?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

JeremySew
  • 65 Answers

SOURCE: I need a foot pedal/power cord for my Euro pro

Email me a picture of the spot on the machine that the foot control cord plugs in and I'll send you the link to the correct one and to order. info@sewingpartsonline.com

Posted on Apr 23, 2009

  • 6 Answers

SOURCE: White w2500 serger - nothing happens when foot pedal pressed

Sounds like it could be wiring - probably a job for a mechanic

Posted on Aug 26, 2009

  • 109 Answers

SOURCE: Singer 2259 - The machine has stopped moving, the

Check to see if you have your bobbin winder on. That's usually the problem. Just push it to the left and you should be ok.

Posted on Sep 11, 2010

Tally Girl
  • 1125 Answers

SOURCE: can't get the machine to run,when I push down on

What make and model? If its an overlocker, many have safety cutout if either of the doors to the workings are open so check this first.

Posted on Mar 06, 2011

Tally Girl
  • 1125 Answers

SOURCE: Problem with a husky lock 340 serger. Wheel on

My Bernette did exactly the same thing as you describe and when I took it to the mechanic there was a gear right inside that had split on the main drive path. It was a nylon gear and it had cracked right through the middle - my machine was about 12 years old at the time.

After one store advised I junk the machine, I then priced the part from Bernina head office, spoke to another mechanic and he was able to send my machine to another mechanic he knew who could pull the thing apart quicker because he'd done the repair before. I was warned it would cost $270-350 but I love the machine so said go ahead.

I'd suggest you take your husky to a local husky dealer for a quote on this, it does sound similar.

Posted on Mar 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Bernina 1300 MDC serger stopped sewing. The light comes on and the machine makes the start up noise but, when I press the foot pedal, nothing happens.The foot works with other machines.


check to see if any thread is jammed inside the right turning side wheel in the core area at times there can be thread that flies in there and may stop the main belt turning.

Apr 08, 2017 | Bernina Sewing Machines

1 Answer

S15 serger. Foot pedal does not seem to get power to work. Am I doing something wrong?


make sure the outlet is working

make sure the power cord is plugged into the machine snug

if there is still no response from the foot pedal, then you may need a new one
or also you may need to have the serger check to see if the plug in the serger is alright

Mar 17, 2015 | Sewing Machines

1 Answer

How do i buy foot control pedal with cord


Your closest dealer carrying your machine or serger brand will be able to assist you or at least order a foot control pedal for your machine/serger.

Sep 30, 2014 | Sewing Machines

1 Answer

Thread nesting below plate with material pulled down inside also.


you might check your upper and lower knives. If they have a chip out of them or are dull some material just will not feed

Apr 06, 2014 | Brother 1034D Serger Sewing Machine

1 Answer

Brother serger slows down


it could be the motor or the power cord or the foot pedal,
check to make sure the power cord and the
foot pedal are connected correctly to the machine.if they are
then the machine and power cord and foot pedal need to be
checked

Nov 13, 2012 | Brother 1034D Serger Sewing Machine

1 Answer

I have a brand new Singer Pro Finish Serger and it won't sew. When I press on the pedal it makes noise, but the needled do not move. Nothing else happens.


are the cords for the power & foot pedal plugged in correctly?
the only thing I can suggest is taking the machine to a sewing machine shop
to be checked
or check on youtube or ehow that can help you

Apr 12, 2012 | Sewing Machines

1 Answer

Serger will power on but i cant get the foot control to work what can be a problem


it's possible that the foot pedal is going out. you might take it to a sewing machine shop & have then machine & foot pedal check

Mar 01, 2012 | Husqvarna Huskylock Computerized 910

1 Answer

White 1600 SpeedyLock. Power, but foot pedal won't engage. Took foot pedal apart, mechanically looks fine-- computer board in there. Do I need a new foot pedal?


When stepping on the foot control, does the motor hum or anything? Or is dead silent? If it sounds like it's trying to do something, the serger probably needs to be serviced. If it's silent, you probably need a new foot control.

Feb 22, 2010 | White Sewing Speedylock 1600 Mechanical...

1 Answer

White w2500 serger - nothing happens when foot pedal pressed


Sounds like it could be wiring - probably a job for a mechanic

Aug 26, 2009 | Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...