Question about Office Equipment & Supplies

Open Question

Fiery X3ety 50_45C-km system software - Office Equipment & Supplies

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2072 Answers

SOURCE: Xerox Fiery Xp12 - Problem (INVALID LICENCE) apears on the screen

You will need to use what came with your machine.
The note from Xerox states this.

NOTE: You will need the Fiery Restore / Update Server Software CD and the User Documentation v2.0 CD that came with your EX12 v2.0 Software

And here is the loading process

  1. Visually check to make sure the Fiery LCD is at the Idle screen before you proceed. This will make sure the Fiery is not in use.
  2. Insert the Fiery Restore / Update Server Software CD into the Fiery EX12.
  3. Press [Menu] button on the Fiery Server.
  4. Press the [Down arrow] button.
  5. Press the [Shut Down] button.
  6. Press the [Reboot System] button. The message 'Rebooting System' will display and disappear after a few moments. The Fiery Server will reboot and complete internal testing. The Restore / Update CD menu will be displayed.

    NOTE: Ignore the message 'It's now safe to power off the system'.

  7. Press the [Up arrow] or [Down arrow] button to scroll to 'Restore System' so this is highlighted. Press the [OK] button. The 'All data will be Deleted. Continue?' message will be displayed.
  8. Press the [Up arrow] or [Down arrow] button to scroll to 'Yes' so this is highlighted. Press the [OK] button. The 'Restoring System...' message will be displayed.

    NOTE: The System Restore will take approximately 7 minutes, during this time the message 'Restoring System...' will continue to be displayed.

  9. Press the [OK] button when the 'Restore Complete!' message is displayed.
  10. Press the [Up arrow] or [Down arrow] button to scroll to 'Exit' so this is highlighted. Press the [OK] button.
  11. Remove Fiery Restore / Update Server Software CD from the EX12.
  12. Power OFF the Fiery Server. The power switch is located on the rear of the server, above the power cord.

    NOTE: Wait 10 seconds before powering ON.

  13. Power ON the Fiery Server. The Fiery Server will boot and complete a self-test.
  14. The EX12 will prompt you to insert the User Documentation CD. Insert the CD and the Fiery will continue with the process. When the process is complete, the Fiery LCD will display the message 'Please remove CD'.
  15. Remove the User Documentation CD
  16. Power OFF the Fiery Server. The power switch is located on the rear of the server, above the power cord.

    NOTE: Wait 10 seconds before powering ON.

  17. Power ON the Fiery Server. The Fiery Server will boot and complete a self-test.
  18. Using the Configuration Report as reference, re-enter the network settings on the EX12.
  19. Install any required patches, as needed. Refer to the Updated Information section on the Configuration Report.
  20. If needed, restore any data that you previously archived. See the Related Items.
elem_1_spacer.gif

Posted on Jan 10, 2008

jaiku
  • 79 Answers

SOURCE: fiery patches

hi better u try to xerox.com/drivers..

Posted on Oct 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the software, Fiery for 65 C-KM version 1.1, how do i install it


Installing Fiery software is notoriously tricky! Although they refer to a different Fiery model, the files in the following link will give you a good idea of what is involved :
MediaFire
..... particularly the software installation guide.

Hope you get it sorted.

Mar 24, 2014 | Konica Minolta bizhub Office Equipment &...

1 Answer

Fiery unit s400 will not work


If you press the Fiery button on the copier does the copier display the Fiery logo and the menu. If yes you are just missing the Fiery software for the workstation (called Command Workstation I believe). If no you will need a service call to possibly reload system software.

Feb 10, 2010 | Office Equipment & Supplies

2 Answers

My fiery EXP 12 not booting what can I do to fix this problem


You should be able to plug a monitor into the fiery. Do that and turn off the machine and fiery. Then power up and watch the monitor and see where it hangs. If it doesn't boot up you may have to get a Xerox technician in to restore/ugrade the system software for the fiery.

Nov 22, 2009 | Xerox DocuColor 12 Color Copier

1 Answer

Fiery x2e system software cd


The best solution is to check the konica websites or contact a dealership.

Nov 19, 2009 | Konica Minolta Office Equipment & Supplies

1 Answer

Clc1150 cannot connect to fiery


Your Fiery need"s system software reloaded. let me know if you need help to do so.

May 11, 2009 | Canon CLC 1150 Color Copier

1 Answer

Fiery of Canon IR300-405 asking Auth Code


I have experienced this before but seem to remember I had to format and upgrade the Fiery software using the special software tool. Everything worked fine then. Sorry I can be more precicse but it was a while ago.

Mar 23, 2009 | Canon Office Equipment & Supplies

2 Answers

Fiery patches


hi better u try to xerox.com/drivers..

Oct 01, 2008 | Xerox DocuColor 12 Printer

3 Answers

Xerox Fiery Xp12 - Problem (INVALID LICENCE) apears on the screen


You will need to use what came with your machine.
The note from Xerox states this.

NOTE: You will need the Fiery Restore / Update Server Software CD and the User Documentation v2.0 CD that came with your EX12 v2.0 Software

And here is the loading process
  1. Visually check to make sure the Fiery LCD is at the Idle screen before you proceed. This will make sure the Fiery is not in use.
  2. Insert the Fiery Restore / Update Server Software CD into the Fiery EX12.
  3. Press [Menu] button on the Fiery Server.
  4. Press the [Down arrow] button.
  5. Press the [Shut Down] button.
  6. Press the [Reboot System] button. The message 'Rebooting System' will display and disappear after a few moments. The Fiery Server will reboot and complete internal testing. The Restore / Update CD menu will be displayed.

    NOTE: Ignore the message 'It's now safe to power off the system'.

  7. Press the [Up arrow] or [Down arrow] button to scroll to 'Restore System' so this is highlighted. Press the [OK] button. The 'All data will be Deleted. Continue?' message will be displayed.
  8. Press the [Up arrow] or [Down arrow] button to scroll to 'Yes' so this is highlighted. Press the [OK] button. The 'Restoring System...' message will be displayed.

    NOTE: The System Restore will take approximately 7 minutes, during this time the message 'Restoring System...' will continue to be displayed.

  9. Press the [OK] button when the 'Restore Complete!' message is displayed.
  10. Press the [Up arrow] or [Down arrow] button to scroll to 'Exit' so this is highlighted. Press the [OK] button.
  11. Remove Fiery Restore / Update Server Software CD from the EX12.
  12. Power OFF the Fiery Server. The power switch is located on the rear of the server, above the power cord.

    NOTE: Wait 10 seconds before powering ON.

  13. Power ON the Fiery Server. The Fiery Server will boot and complete a self-test.
  14. The EX12 will prompt you to insert the User Documentation CD. Insert the CD and the Fiery will continue with the process. When the process is complete, the Fiery LCD will display the message 'Please remove CD'.
  15. Remove the User Documentation CD
  16. Power OFF the Fiery Server. The power switch is located on the rear of the server, above the power cord.

    NOTE: Wait 10 seconds before powering ON.

  17. Power ON the Fiery Server. The Fiery Server will boot and complete a self-test.
  18. Using the Configuration Report as reference, re-enter the network settings on the EX12.
  19. Install any required patches, as needed. Refer to the Updated Information section on the Configuration Report.
  20. If needed, restore any data that you previously archived. See the Related Items.
elem_1_spacer.gif

Jan 10, 2008 | Xerox DocuColor 12 Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...