Question about SkyScan 86709 Atomic Wall Clock
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Out side temperature reading
Without having parts to try, this would be difficult to know what the fault is. Inside this unit there is a circuit board, and on the outside there is the exernal temperature sensor.
There are only a few things that can go wrong. There is not much that is servicable unless you can find a spare board, or a spare temperture probe. There is very little posiblity that in any practicality this unit can be serviced at the component level.
I would just go out and buy a new unit.
Posted on Apr 21, 2008
Press set button repeatedly -you get timezone mode and change your wished time zone and select your zone then press set button to normal mode and adjust the current time. kindly gave your rating after you read this.
Posted on Nov 20, 2008
I just changed the batteries yesterday. It was hard to open the battery compartment with bare hands/finders. I used flat screw driver to poke into the notch in the center of the transmitter. Or you can try poke into any **** around the compartment. It works!
Posted on Apr 24, 2010
Take the batteries out of the clock AND the temp transmitter. Wait about a minute, then replace the clock batteries. Wait another minute, then replace the transmitter batteries. Once the clock synchronizes with the satellite, you will need to set the time zone and whether you want DST on or off.
Posted on Jun 29, 2010
hello lucy... you most likely have some corrosion in the outdoor component. Remove the batteries from the outdoor component and clean the battery contacts with the eraser end of a common pencil. Reinstall the batteries and then give it up to 8 hours to start reporting accurately again. Joe
Thanks for choosing Fixya!
Posted on Feb 18, 2011
Tips for a great answer:
Jun 28, 2014 | Sangean RCR-1 Clock Radio
The Sio/Scan Atomic clocks should automatically set the time and date.
Place the clock in a window facing towards Colorado and give it 24 hrs to update
If that fails here's the web site for them:
Jan 03, 2011 | Vacuums
Jun 28, 2010 | SkyScan 86709 Atomic Wall Clock
Feb 17, 2010 | SkyScan 86709 Atomic Wall Clock
Feb 10, 2010 | Kitchen Appliances - Others
Jan 22, 2010 | SkyScan Audio Players & Recorders
Dec 08, 2009 | SkyScan 86709 Atomic Wall Clock
Nov 29, 2009 | Audio Players & Recorders
Nov 02, 2009 | SkyScan 86709 Atomic Wall Clock
Nov 07, 2008 | SkyScan 86709 Atomic Wall Clock
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: