Question about Casio G-Shock GW300CA-1V Wrist Watch

Open Question

How to set time on Casio pro trek 5114 - Casio G-Shock GW300CA-1V Wrist Watch

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: Casio pro-trek PRG-60T Buttons no longer activate anything.

Is the battery indicator on L (Low). If so only timekeeping will work. Check out the manual which tells you that.

Try sticking the watch in a window to charge it till the battery indicator gets to H (may take up to 10 days for a very run down battery). If that doesn't work it send it to Casio for a battery change. Cost of change just over 20GBP sterling.

Posted on Feb 19, 2009

escapement
  • 2334 Answers

SOURCE: reset casio pro trek prg 80l after discharge of

You can find details here: http://world.casio.com/wat/download/en/manual/
Rate me, plz.

Posted on Jan 10, 2010

  • 1 Answer

SOURCE: casio PRO TREK error 'OP EN'

The problems is very simple: On the back cover (inside) is a little Cu metal Part. This part is glued to back cover using a poor glue (rubbered glue) and, in time, is moving from original position. You must put back this parts to original positin ( a little hole inside of back cover) and glue using a good glue. When the back cover is mounted , this part must have a ferm contact with two springs from mechanism (sensor for back cover open). If beatwin this springs isn't a electric short (using Cu metal parts) the internal mechanism of watch "see" the back cover is open and show "OPEN" on screen!

Posted on Apr 02, 2010

Testimonial: "Simple .... once you know ! (as most things) The "obvious" question is: How did you figure it out ? But THANKS !!"

  • 2501 Answers

SOURCE: just got my husband a

As a pure shot in the dark, are you sure that you calibrated it so that it was pointing to the north when it should be and not to south?

If it was pointing south instead of north, then East and West would be reversed.

Sounds a bit daft but better than the directions of east and west changing?

Check your calibration perhaps?

Posted on Nov 29, 2010

kerguney
  • 575 Answers

SOURCE: Change time on a pro trek casio

Hi,
you need to look at the user manual that
you can download a soft version of the user manual on below link. .when you open the link just write the 4 digits code on the back side and click searched on the URL below

Hope this helps! Take care and please Remember to rate/vote and
give me 4 Thumbs Up for me to continue for Helping out the Community :)
Thanks

***************************
CASIO Watch User Manual Archives
http://world.casio.com/wat/download/en/manual/
Use this page to download a copy of CASIO watch manuals in PDF format.
To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

Posted on Oct 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set time on Casio 550 pro trek. I can't get it to set for daylight savings time.


According to Casio, in the time keeping mode hold the E until each of the following steps occur. hold SET appears in digital display>HT flashes. Second hand points to the current home city code. Set 2: Use A to select the city code you want to select as your home city. Each press of A moves the second hand clockwise. keep pressing A until it lands on the city code you need. Select your home city code before changing any other setting. Step 3: Press D to cycle through the available settings on the digital display. When the time keeping setting you want to change is displayed, you A ad or C to change it. Step 5: Press E to exit the screen, the hands of the watch will move to the time you set. Any other information or diagram is listed on the website Casiowatchparts.com

Mar 13, 2016 | Casio Watches

1 Answer

How do I set the alarm on a men's Casio Pro Trek digital atomic watch pq635?


Get in touch with Casio support: http://www.casio.com/support

May 08, 2015 | Casio Watches

1 Answer

Change time on a pro trek casio


Hi,
you need to look at the user manual that
you can download a soft version of the user manual on below link. .when you open the link just write the 4 digits code on the back side and click searched on the URL below

Hope this helps! Take care and please Remember to rate/vote and
give me 4 Thumbs Up for me to continue for Helping out the Community :)
Thanks

***************************
CASIO Watch User Manual Archives
http://world.casio.com/wat/download/en/manual/
Use this page to download a copy of CASIO watch manuals in PDF format.
To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

Oct 02, 2011 | Casio G-Shock GW300CA-1V Wrist Watch

1 Answer

My pro trek solar powered watch still tells the time but other functions dont work any idea


CASIO has so many complicated watches and they all have different uses, etc. Your BEST bet is to check out their awesome website. They have a FAQ area where I would check, or just ask their customer service. Sorry. Best I can tell you. Best regards.
http://www.casio-intl.com/support/

Aug 23, 2010 | Watches

3 Answers

Casio PRO TREK error 'OP EN' Display frozen with the above msg. None of the buttons - except the light - works. Whats wrong .. battery charge shows FULL


The problems is very simple: On the back cover (inside) is a little Cu metal Part. This part is glued to back cover using a poor glue (rubbered glue) and, in time, is moving from original position. You must put back this parts to original positin ( a little hole inside of back cover) and glue using a good glue. When the back cover is mounted , this part must have a ferm contact with two springs from mechanism (sensor for back cover open). If beatwin this springs isn't a electric short (using Cu metal parts) the internal mechanism of watch "see" the back cover is open and show "OPEN" on screen!

Mar 22, 2010 | Casio Watches

1 Answer

I have a casio watch what has a moon and tide phase graoh but no instructions


Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all CASIO watch manuals. Rate me, please

Mar 08, 2010 | Casio Pro Trek Tide Moon Graph Titanium...

1 Answer

Buttons on casio pro trek watch stopped working -time still shows


Sounds like the solar back up cell needs to be replaced. You can get it repaired for rather cheap less that $30(US). You can contact www.casiosalesandservice.com to have it serviced. 877.659.0761

Jun 25, 2009 | Casio Protrek Triple Sensor Tough Solar...

3 Answers

Casio pro-trek PRG-60T Buttons no longer activate anything.


Send it into repairs and they will send you an estimate on what it would cost to fix it. Give them a call at 800-706-2534 option 2.

Feb 19, 2008 | Casio Triple Sensor Pathfinder PRG60-1AV...

Not finding what you are looking for?
Casio G-Shock GW300CA-1V Wrist Watch Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...