How to change tax amount on a sharp xe a202 cash register

To change the name of the tax on your Sharp XE-A202 cash register, you will need to follow these steps:

1. Press the "Menu" button on the register.
2. Use the arrow keys to navigate to "Program" and press the "Enter" button.
3. Use the arrow keys to navigate to "Tax" and press the "Enter" button.
4. Use the arrow keys to navigate to the tax rate you want to change, and press the "Enter" button.
5. Use the arrow keys to navigate to "Name" and press the "Enter" button.
6. Enter the new name for the tax rate (e.g., "Tax 23%") by using the number keys and then press the "Enter" button.
7. Press the "Menu" button to exit the program mode.

It's worth noting that the process for changing the name of the tax may vary depending on the specific model and firmware version of your Sharp XE-A202 cash register. If you are unsure about how to change the name of the tax or if you need further assistance, I would recommend consulting the user manual or contacting Sharp's customer support for further assistance.

Could be if your lucky, check owner's manual.

You are not logged in. press 1 then the # key then you will be fine

There is a lever under the cash drawer . push it to the left

What do you want to program. Please specify

Replace the head

www.eposwizard.com.uk catch it

press 1 and then press clk key

Sharp Electronic Cash Register XE-A202
Will not print out receipt. Paper will roll out. just not printing

9 => SBTL => Tax Number (1-4**) => @/TM => R => @/TM => Q => CA/AT/NS

"R": TAX RATE (0.0000% to 99.9999%) x10000
(Enter the rate in 6 digits. Leading Zeros may be ommited)

"Q": MINIMUM TAXABLE AMOUNT (0.01 to 99.99) x100
(Smallest amount for which tax must be collected)

**Up to 4 types of tax are programmable

Hope this helps!