Question about Sewing Machines

Open Question

Fit a bobbin in a JC2 crown park sewing machine

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 27 Answers

SOURCE: Brother Sewing Machine model:CS8150 bobbin thread problems

The top of the machine is not threaded correctly. First raise the presserfot then rethread the machine. Bottom looping is usually caused by a lack of top tension. There could allso be a bur on the hook.

Posted on Feb 23, 2008

  • 8 Answers

SOURCE: Bobbin thread breaks

Make sure your bobbin thread is turning clockwise as it sits in the bobbin case. There is a screw on the outside of the bobbin case you can turn with your thumb slightly to adjust tension. If you dangle the case from the thread and give it a light ****, it should move down slightly when doing so-an indicator of good bobbin tension.

Posted on May 20, 2008

  • 47 Answers

SOURCE: How to Thread the bobbin on my sewing machine

Visit us at www.ifixmachine.com to avail for a new manual for only $10.00

Posted on Jul 24, 2009

  • 26 Answers

SOURCE: needle wont pick up bobbin thread

timing issue, need to have serviced.

Posted on Aug 22, 2009

Mongo32
  • 111 Answers

SOURCE: singer sewing machine, needle will not pick up bobbin thread?

needle in backwards?

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i use a metal bobbin with husqvarna 1100?


What is important is that the bobbin is compatible with your machine. Not all bobbins will work even though they may fit into the machine. Using the correct bobbin is very important for a successful sewing experience. For the few dollars it will cost, purchase the right bobbin for your machine.

http://www.sewingpartsonline.com/husqvarna-viking-1100-sewing-machine-parts.aspx

Husqvarna Viking Concave Bobbins for 1 1100 1090


...

Nov 30, 2016 | Sewing Machines

2 Answers

What #holes on 158.1786181 solid state Kenmore sew machine bobbin


Do you mean the lower bobbin spool? It should not matter too much so long as it fits. Try it on a scrap of material and see how it goes.

Mar 02, 2015 | Kenmore Sewing Machines

1 Answer

How to put a bobbin shuttle into sewing machine Bobbin case?


It's like one of those peg boards you have to turn your bobbin case round and round until it fits. It should click right in unless you have the wrong size bobbin

Sep 06, 2014 | Brother CS-8060 Computerized Sewing...

1 Answer

Rattle in the bobbin area.


make sure the bobbin is not warped or damaged
also make sure the bobbin fits securely in the bobbin case
does the bobbin case fit securely in the machine?
the bobbin case could be getting old & might need to be replaced.

Apr 12, 2012 | Sewing Machines

1 Answer

Bobbin cover will not close


if the bobbin cover won't fit easily over the bobbin the either it's the wrong bobbin for the machine, the bobbin is warped or there is something wrong with the bobbin case

Feb 09, 2012 | Kenmore Drop-In Bobbin 16231 Mechanical...

1 Answer

I have singer sewing machine. The black casing the bobbin fits in is supposed to move when sewing, I know, but this seems to move excessively and does not fit in tight enough so that when sewing, it slips...


The black bobbin case that the bobbin sites in is not supposed to move at all, on the right hand side of the bobbin case you will see two screws, if you slacken them off you can push the guide bar closer to the bobbin case leaving enough thread to pass through the gap.

May 12, 2009 | Singer 132QRFB Mechanical Sewing Machine

1 Answer

Bobbin case not fitting


541678 is the bobbin case you want.Most sewing machine dealers can get this part for you. The machine was made from 1978 to 1984. Before you spend a lot of money repairing this machine, check,or have someone else check, the cam drive gears in the top of the machine. They frequently crack and cause a lot of noise and some erratic stitching.
sewman7

Apr 29, 2009 | Brother LS-2125 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...