Question about iLO 3200 32 in. LCD Television
There is no code for ILO TV in my universal remote code list. I went through the process of letting the remote do the searching and still no code to operate the TV with the universal cable remote.
I had the same problem trying to program my satellite remote to work with the ILO tv. I found that the emerson codes DO work. Yes local cable remotes will work as long as you have the code and the brand is getting more popular. The code that worked with both cable companys, Charter and DirecTv was 10171 I believe. You can find it under the Emerson codes. Hope this was helpful.
Posted on Dec 07, 2007
One for all remote code that worked for us was #0171
Posted on Dec 31, 2007
I bought the all for one at walmart... and the code is emerson's 0463..
Posted on Jan 12, 2008
** This works with Phillips Universal Remotes **
Start with holding down the "code search" button until the red light turns on and stays on. Next press the tv button. Last, repeatedly press the power button until the TV turns off followed with the mute button to program it. That's it.... it worked for me. NOTE*- make sure to not get impatient and start clicking to fast like I did because you will overshoot the code. All the important functions work including: power, channel up/down, and volume. Hope this helps
Posted on Mar 10, 2009
All I can tell you guys for sure is that I just programmed my Scientific Atlantica cable box remote to control a newly purchased Ilo 27 in.TV with 0477 - that's an Emerson code and it seems to do on/off, volume, muting and even the on screen programming functions. Hope this helps someone.
Posted on Mar 09, 2008
For those of you with a checkmate u43c cable remote the ilo 27" can be programed by turning your tv on .......then on the remote.... 1. Hold the tv and select buttons until the red light at the top of the remote stays lit. 2. hold the channel up button until the tv shuts off. 3. hit mute button and if tv turns back on the code is stored....Thats it...Hope this helps!!!!...It took me a couple of days to find this out....Good luck!!!
Posted on Dec 25, 2007
Go to Lowes and get a RCA universal remote model RCR311BN.
It cost only $11.99 and it will work with the ILO TVS. Follow the instructions using the brand code search and you will be working in 5 minutes. This remote also works all functions with dish network satellite
I searched for months to find a universal remote that would work. This one works for almost all TV's, satellite, DVD & blue-ray players and it is inexpensive.
Posted on Jan 10, 2010
If you have a Direct TV remote, the actual ilo codes they have listed do not work on all TV's. Try Funai codes. The most popular is 10171. Why can't people make things easiers these days, especially with all our technology. Good luck.
Posted on Feb 02, 2008
After my remote stopped working on my 26" ilo tv, I came to the internet to find the codes for a universal remote. I have tried 4 different remotes and every code you guys posted. nothing worked. I even called sony and they tried to help me with theirs. so i told my wife its time to buy a new one from Ilo. BUT, last night i got the non working remote, took a sharp knife and scraped at the coils and lifted them out a little, GOOD AS NEW, it works. one coil seemed to be a little brown in color, rust?.. not sure, but im happy now... I hope this works for you
Posted on Jan 08, 2009
I got my remote from my cable provider and got my tv 42 hdtv iLo brand and none of these codes work for my remote....i will continue to search on the internet.
Posted on Mar 23, 2008
Try Changhong coe #10765 for direct tv remote...
Posted on Feb 07, 2008
I bought a Direct TV remote today at Wal Mart --model RC64-- emerson code 10463 works with my iLo
Posted on Jan 30, 2010
I have a 27" ilo sdtv. Bought the RCA universal at wal mart (8 dollars) model RCR312W and followed the auto scan directions. It found a code on the second group of 10. All functions work!
Posted on May 24, 2009
The ILO codes for a direct tv remote are 11286, 11603, 11684, 11990
Posted on Mar 19, 2011
I have an ILO and tried the Emerson codes - i have Timewarner cable in upstate NY, and the 169 code worked on the Synergy V remote
Posted on Mar 29, 2008
Ilo's programming code for their tvs is a 4 digit code. While I don't remember what that code is, there is a universal remote called "3 for 1" or something like that, sold at Wal Mart, that has the code and, I would presume will work with it. This may be old news and if so, sorry I couldn't help further...timitot2
Posted on Aug 26, 2007
Sorry to say, it's not a well-known brand so most "local cable" remotes wont be able to control the Ilo tv. I'd recommend searching their site to find a universal remote that would operate your tv, cable, etc..
Posted on May 23, 2007
Try the following codes, one of these worked for me.
Posted on Feb 06, 2008
Emerson Code 0463 worked for the Comcast All-in-One remote on my 27 in ilo
Posted on Mar 15, 2009
If you happen to have cable from Bresnan cable, the solution for finding the code is as follows:
Turn tv on
Press device key (in this case tv)
Press and hold setup until the light blinks twice
Press 9-9-1 (the LED will blink twice)
Press power key
Press channel up until the tv turns off
Press setup when device turns off.
Your universal remote will now work with your iLo tv.
For those who have satellite through DishNetwork, etc., they have a similar system. If you call tech support they can walk you through the steps, or if you still have your manuals you received at the time it was installed there are steps in them to walk you through the manual search for the code. If you have cable through someone other than Bresnan, first check your manuals (if you have them), or call tech support for your local cable company and see if their remotes have a manual search option. Hope this helps!
Posted on Jul 06, 2008
My remote quit qorking for our ilo tv and I've tried all these for said codes for a One For All universal remote and since none of them worked I tried a few of the tv models and tried many codes and found one for Zenith code 0463 that worked. Hope this helps someone.
Posted on Aug 26, 2008
WAL-MART AND FUNAI.CORP ARE A BUNCH OF RIP OFFS,I GOT A 32 IN. AND THE REMOTE DONT WORK.I WOULD NOT RECOMMEND BUYING ANYTHING OF VALUE FROM WAL-MART... PERIOD,IF IT COSTS MORE AT BEST BUY THEN OH WELL JUST PAY THE EXTRA,WILL BE WORTH IT IN THE LONG RUN,I RECENTLY CONTACTED FUNAI.CORP BY PHONE THEY REFUSE TO REPLACE THE REMOTE BUT WILL SELL YOU ONE,WHAT A CROCK OF $%#@ IF I SAY SO MYSELF.....!!!!!!!!!!!!!
Posted on Apr 25, 2008
Don't by the remote at wal-mart it doesn't work, that's why I'm here now.
Posted on Dec 03, 2007
I have the same t.v. and had the same problem this is the only thing that worked start the progarming process and key 11990.
Posted on Mar 03, 2009
Funai code is right but it is 1107. Thanks though!
Posted on Oct 09, 2007
Funai Code 0171 worked for me. you can try other funai codes
Posted on Oct 05, 2007
I was trying to program my 32 inch ilo t.v. with a r.c.a digital converter box remote finally got it to work with a admiral code 189. Hope this helps someone out.
Posted on Jan 30, 2010
I got a 27inch ILO tv, my remote broke and I have a philips universal remote, none of the codes work.
Posted on May 05, 2008
To Use Comcast Cable with Ilo (ilo)32" CRT (Tube TV - Not Flat Panel) use code "10171" tested working, Then Use RED button on remote that says "ALL ON" to turn the TV and the Cable Box ON, Hit it again and turn ALL OFF! Sweet setup now. All I have to do is add my surround sound unit to the AUX, and I am finished!! GUARANTEED SOLUTION FOUND!!
Posted on Mar 13, 2011
Code #0171worked for my ILO.
Posted on Oct 07, 2009
Emerson codes work for ILO 27in. TV. I have Comcast. "Code 10463"
Posted on Feb 14, 2008
The only universal remote I could find that has Ilo codes is the Sony RM-V210...cost between 10 and 20 dollars.
Posted on Feb 22, 2009
463 worked for me
Posted on Mar 17, 2009
There is no code for ILO TV in my universal remote code list. I went through the process of letting the remote do the searching and still no code to operate the TV with the universal cable remote. It seems that no can help us that have ILO tv..This is frustrating.
Posted on Jan 23, 2009
Try turning the tv on, set up for the code, then click the off button, then the chanel UP till
till the tv shuts off. Then click the # to set the code. This should work.
Old Man Cleat;
Posted on Apr 27, 2009
Do auto scan with remote.
Posted on Sep 03, 2015
I just used 10463 which IS an emerson code for the Comcast universal remote. Thanks to everyone for the tips and hints. :)
Posted on Jul 28, 2013
I have an ilo tv model IWT3206 with a charter cable remote model UR4U-MDVR-CHD2. The funai code 052 will work for this. But when I entered it manually it did not work, I had to let the remote scan and find it and then it works fine. Hope this helps somebody.
Posted on Sep 22, 2009
I bought an ILO TV and when programming my remote, found out that it is made by Funai. I used one of their codes for my tv.
Posted on Jan 07, 2008
We to also lost our remote for the Ilo tv. We found that on the All for one replacement remote code 0171 for Funai worked and also for Direct TV remote the code 10171 for Emerson worked as well. Good luck to all who need it.
Posted on Jan 03, 2008
Seems ilo televisions dont have a clue of how to fix these problems.I have a 26 inch lcd tv that the remote doesnt work,the channles dont change and is stuck on one channel.Walmart doenst care too much so everyone should file a big ass lawsuite
Posted on May 27, 2007
I followed the advice of a post on here, that said to scrape the rust off the coils and pull them up a bit. I opened the battery case and saw one of the coils was covered in a rusty substance. I used a fingernail file and scraped the coil and then pulled it up a bit. Put in fresh batteries and IT WORKS!!!! I hope this helps. Please check the battery coils before buying a new remote!!!
Posted on Jun 14, 2010
Tips for a great answer:
Dec 09, 2015 | iLO Flat Panel Televisions
Oct 18, 2015 | iLO Flat Panel Televisions
Aug 14, 2012 | iLO 3200 32 in. LCD Television
Jan 11, 2009 | iLO 2600 Television
Jul 14, 2007 | iLO V27DMBX Television
Mar 16, 2007 | iLO 2600 Television
68,470 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: