Question about HP Color LaserJet 2600n Printer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: HP LaserJet Color Laser Printer
Try this....power cycle the printer. When the memory count starts Press and hold the MENU button.
Release the MENU button when all 3 LEDS are lit.
Press the < button
The display will show INITIALIZE DISKS if you did the above correctly.
Press the green CHECK button and wait for the printer to come READY.
Posted on Oct 11, 2010
Are you trying to print a PDF file from the internet?
The Jetdirect card could be the problem, especially if it's the 615n type, as they fail a lot..
The most likely cause is the firmware, which can be changed by installing Web Jetadmin on a PC on your network. You will need to have internet access in order to obtain the latest firmware. Most of the FW images from 2008 are the cause of the 49.4c errors. So you need to install a newer image (if not available you will need the post 2008 file).
Here are directions for setting up Web Jetadmin
Also, if the printer doesn't come to ready, try removing the cable to the network card and turn on again as it could be a job stuck in some print queue that is still trying to print causing the error. If you are able to get the printer to ready with the jet direct card connected you do not need web jet admin to upgrade. A better way may be to run a config page from the information menu and on the second page will be the tcp/ip address. Download the firmware upgrade to the printer and then ftp the address into your web browser which should look something like ( ex: ftp:/192.168.2.10) where the info after the forward slash is the ip address and hit enter and you should come up with a Port icon in the window. Just drag the firmware upgrade file to the icon and it will upgrade the
Hope this helps you
Posted on Oct 28, 2010
Tips for a great answer:
Feb 23, 2011 | Konica Minolta magicolor 4650DN Laser...
Feb 21, 2011 | HP LaserJet 4650dn Printer
Oct 28, 2010 | HP LaserJet 4650dn Printer
Sep 08, 2010 | HP LaserJet 4650 Color Printer Manual...
Dec 22, 2009 | HP LaserJet 4650dn Printer
Nov 04, 2009 | HP LaserJet 3800dtn Printer
Sep 04, 2009 | HP LaserJet 4600dn Color Printer
Jul 29, 2009 | HP LaserJet 4650 Color Printer Manual...
290 people viewed this question
Usually answered in minutes!