Question about HP PL5060N 50 in. Plasma HDTV

Open Question

BLINKING LIGHTS ON PLASMA TV

RED BLUE AND WHITE LIGHTS BLINKING HORIZONTALLY ON MY 50 INCH HEWLITT PACKARD PLASMA TELEVISION WHAT CAUSES THIS

Posted by on

4 Suggested Answers

  • 3 Answers

SOURCE: blinking light on plasma television

is this occurring when tv is on/off? how old is plasma tv? they have a screen life of approx 3500-5000 hours. be better to contact manufacterer

Posted on Jan 06, 2009

jscruggs420
  • 36 Answers

SOURCE: 50 inch HP Plasma Gone Wild...

Here's the number to HP case management 877-917-4380 ext.79, try this number and be firm that they need to fix this, I just had an HP plasma that was 3 yrs old replaced for free, no charge. Good luck

Posted on Feb 04, 2009

skistockli
  • 73 Answers

SOURCE: white lines at the top of my hp 42 inch plasma tv.

This HP model is know for many defects. It was sold by HP with a board problem. Contact us to get your TV fixed as a group. dorje@forexcafe.org

Posted on Jul 11, 2009

rylee_smith
  • 8619 Answers

SOURCE: My HP 50 inch Plasma

Hi


Thanks for using FixYa. From what you have described it seems to be the issue with Y-main however, the logic board should also be checked. These boards are located on the right side of the unit and to check them you’ll have to open the back of the unit. Once you have opened the back also check for any blown/bulged capacitors.
All this is only recommended if you have electrical expertise & know how to solder/re-solder components as these units contain high voltages even when in off position. The cost to get this repair will be around $300 and a bit more if the board is replaced. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Posted on Sep 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blue & red horizontal lines in plasma tv


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
Line, faults & possible causes to both Plasma & LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Jan 18, 2016 | Panasonic Viera TC-P50G25 50" Plasma TV

2 Answers

Pioneer PDP-r06xe 50 in. Plasma Television Problem. During a Rain Storm - a lightening strike in my loft - the save system it has protect several electronics, but when I try to switch on - the TV it turn...


when switch ON it blinks 7time blue led - then switch OFF by SELF and blinks 8time blue led. Of-course when it switch off by self the TV swap the led from blue to red but the blinking Blue led is on the Receiver (The switcher on the TV is never blinking)

May 22, 2010 | Pioneer PDP-4350HD 43 in. Plasma...

1 Answer

50" lg plasma tv will not power up


The problem with the set is bulged electrolytic capacitors in the power supply.

May 16, 2010 | LG 42PX5D 42 in. Plasma HDTV

1 Answer

My 50 inch Hitachi plasma 1080 tv has a blinking blue light and screen is blank when powered on.


my hatachi hd/1080 tv has a solid blue light on and it wont turn on i push the reset button on the bottom right and it still wont turn on

Mar 27, 2010 | Hitachi P50H401 50 in. Plasma HDTV

2 Answers

My tv won't turn on, the red light just blinks and


power suppy needs replacing...according to samsung and other forums i read when mine did this its a common problem

Feb 09, 2010 | Samsung HP-R4262 42 in. Plasma Television

1 Answer

2 horizontal blue lines on samsung 50 plasma tv


Possibly could be the Y buffers --if the are next to each other could be a bad connection on a ribbon cable ---you need to call for service

Feb 05, 2010 | Samsung PS50A457 50 in. Plasma TV

1 Answer

Blinking light on plasma television


is this occurring when tv is on/off? how old is plasma tv? they have a screen life of approx 3500-5000 hours. be better to contact manufacterer

Jan 05, 2009 | HP Pavilion dv6000z Notebook

3 Answers

Panasonic 50 inch Plasma


it could have over heated you can try to reset it first unplug it for about five minutes and try to turn it on if that dont work the remote might have a set button try holding that down until the red light flashes twice, then turn it on if not then hold the power button down on the set for a good five seconds to see if that resets it. if none of that works you will have to go to panasonic .com for the reset instructions.with the red light blinking the power supply is most likely good you just need to reset i.

Dec 24, 2007 | Panasonic TH-42PD50U 42 in. Plasma EDTV

Not finding what you are looking for?
HP PL5060N 50 in. Plasma HDTV Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Televison & Video Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

The Knight
The Knight

Level 3 Expert

72640 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...