Question about Linksys WRT120N Router
The Linksys maybe faulty, could be damaged by a lighten strike on the power lines.
Posted on Nov 08, 2012
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
One thing that isn't mentioned anywhere is the modem has to be in bridge mode. I was told this by a Linksys tech after doing all that was documented in the references article. I contacted my internet provider and they told me how to set the modem to bridge mode. This corrected the PPPoE error.
Posted on Jun 09, 2008
SOURCE: Linksys router not turning on
First check your circuit breaker or fuses to make sure all are operating. Sometimes a power outage results in a line spike that burns out electronics.
If you are certain that you have power to the receptacles, then you masy want to try to put a claim into your power company for replacement of the electronics.
Posted on Apr 26, 2009
if your not able to connect then id try rebooting it all start with the modem then the router and your pc see if that helps and if nothing works it very well could be the modem
Posted on Oct 01, 2009
If the power light is blinking on the router , then it might not be working properly.
You will need to press the reset button on the back side of the router for 30 seconds. release it. unplug the power cable. plug it back in. wait for a minute and check if the power light is solid.
If not then try to reset the router again.
do the same thing and check if the power light is solid.
If the power light is solid then you will need to set up the router again.
If the power light is still blinking, then connect the computer to the router and check the IP address on the computer. If the IP address is 192.168.1.100 then try to open the set up page of the router and check the settings of the router.
Click Here for step by step instructions
Posted on Dec 02, 2009
If you connect the computer directly to the AT&T modem , it work. That means the modem is working properly.
AT&T is DSL connection type. the DSL connection works on 2 different modes. 1) DHCP 2) PPPOE.
Now you will need to connect the modem and the computer to the router. open the set up page of the rotuer.
The set up page is the page where you can change the settings of the router.
According to the type of internet connection you can change the settings of the router
Click Here for step by step by instructions
Posted on Feb 16, 2010
Tips for a great answer:
Jun 21, 2017 | Road Motorcycles
May 04, 2016 | NEC Dterm DTP-2DT-1 Phone
Jun 01, 2015 | Computers & Internet
May 13, 2014 | Office Equipment & Supplies
Nov 05, 2012 | Kenmore Refrigerators
Jan 10, 2011 | Computers & Internet
Dec 31, 2010 | Jasco 15079 SevenDay TwoOutlet Digital...
79 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: