Question about Lands Phones
THE PHONE WILL LIGHT UP AND RING WITH NO NUMBER SHOWING. WHEN YOU ANSWER THERE IS NO ONE THERE NOT EVEN A DIAL TONE. I HAVE TO BELIEVE IT IS IN THE SETTINGS SOME WAY
When setting problem then u face one or two problem but when exes problem facing then it is not setting problem i think so .at first identify one by one problem than go phone setting
at u fix it and check i.t i hope this is no setting problem
Posted on Nov 07, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
unplug everthing from all jacks in the house. call your # a couple of times. if the line rings, plug everything in 1 at a time, but call again after each hook up. if the line goes dead or is busy, that phone you just plugged in is the problem. [ a short in the phone, computer, answer machine, or any piece of equipment plugged into the phone line.] if the line is busy when everything is unplugged, call your phone company. there maybe a problem with your inside wire.there also maybe a box [called a nid] inside your basment/garage or on the side of your house, where you can plug your phone directly in, bypassing all the jacks in your house
hope this helps.
Posted on Feb 13, 2008
I have two older (2002) model cordless Uniden phones that require the handsets to return to their original factory bases. If they have rested on another Uniden base, even of the same model, there is no dialup tone. Replace to the original base and you should be back in service.
Posted on Aug 16, 2008
Hi peddler65, did you plug your phone into another area to see if there is a dial tone. Then if not call the phone company or find the D-mark (where your dial tone ) comes into your home and put a jack on that and plug a phone in with all phones
in the house unplugged.
Posted on Nov 15, 2008
SOURCE: Dial Tone but won't call out.
I just had the same problem. Try unplugging the plug from the electrical outlet for the home(base) unit and plugging back in. Fixed my problem right away.
Posted on Jan 06, 2009
Try punching in the number to call first THEN hit talk.. It should dial and call at that point..
Just like when making a call from your cell phn - dial the # first..
good luck ;o)
Posted on Sep 17, 2009
Tips for a great answer:
Aug 11, 2014 | Samsung SCX 4521F All-In-One Laser Printer
May 31, 2011 | Office Equipment & Supplies
Feb 16, 2011 | Cell Phones
Dec 15, 2010 | Panasonic KX-T7565 Corded Telephone
Nov 09, 2009 | Samsung SCX 4521F All-In-One Laser Printer
Aug 06, 2009 | Canon imageCLASS MF5750 All-In-One Laser...
Dec 01, 2008 | Uniden Cordless Phone
Sep 01, 2008 | Brother MFC-5840CN All-In-One InkJet...
90 people viewed this question
Usually answered in minutes!