Question about LG Washing Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: smoke coming from back of
You may have overloaded the washer and the belt drive system could not handle that excess mass.. The smoke and burning smell is a belt melting while trying to rotate the drum.. I would unload it .. gain access to the drive mechanism ( probably via an access panel in the back but may not be.. - brand and model specific).. and then check for damage to the drive belt.. You may look at the pulley system and look for burnt black from melted belt on it.. You could also have a clog in your pump that the belt drives but can't ( because of that clog) and therefore the belt rubs over the pump pulley and melts.. Could be any one of those things.. Hope that helps..
Posted on Aug 24, 2008
It could be one of 2 things. 1 the belt. or 2 the main seal and bearing. i recomnd to get a tech just to make suer.
Posted on Sep 16, 2008
this is a bogus website that is trying to push smelly washer product....no real fixes and there are other products out there for less just use bleach first
Posted on Oct 01, 2008
You said, frigidaire GLWS1349AS1 TOP LOADING WASHING MACHINE
pls help - is the machine done with- it set the smoke alarms off ???
Sounds like the belt is loose and smelled like rubber burning from spinning fast!
Let me know.
Please remember to leave a rating
Posted on Oct 06, 2008
You most likelyhave burned a drive belt. Could be a couple things. If the machine was loaded to the max and a bit more, it is possible that a small article of clothes may have been flung into the outer tub and into the pump... this can freeze it up and the motor will keep trying to turn the belt against a frozen pulley.
You'll need to open the machine and check the pump for blockage and change the belt... let us know if we can help with procedures..
Posted on Jun 25, 2009
Tips for a great answer:
Jan 25, 2016 | LG Washing Machines
Aug 05, 2014 | LG WM2016CW Front Load Washer
Jun 21, 2014 | Garden
Dec 11, 2013 | Nissan Maxima Cars & Trucks
Oct 01, 2012 | Washing Machines
Jun 14, 2010 | Hoover Self-Propelled WindTunnel Bagless...
Sep 03, 2009 | Bissell 1697-7 Powersteamer Pro Deluxe...
Oct 06, 2008 | Frigidaire GLWS1339CS Top Load Washer
642 people viewed this question
Usually answered in minutes!