Question about Televison & Video
I need a remote control code for a Bell receiver remote 6.4 IR/UHF Pro IC:1707A-DKNFSK03 168590 to program the remote to control my Prima Q328 Television
It may not be possible as that remote has a limited number of codes and even if it programs may only do a few things.
Try all the possible codes and look to see if that remote has a search feature which would allow you to try each and every code it has.
Posted on Nov 08, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Prima 32" TV
Run to the shop you got this tv from i got the same company tv and shok to see that so many people face problam from this brand. Hope that you have warranty
Posted on May 24, 2008
Programming an Expressvu remote control can be frustrating. There are two basic ways of doing in it. The first one involves knowing both your TV brand name and also knowing the proper code to input in your remote. The second method is doing an automatic search. The following is a step by step procedure in how to program your dish network or Expressvu remote.
1)Make sure your TV and Satellite Receiver is ON.
2)Press and hold TV button until all lights on the side of it flashes. The TV button is the second button on the Top left hand side corner of the remote control.
3) Release that button, then press & release RED Button. You will notice TV button is stays on. If, it doesn't stay ON, you must repeat step 2 & 3. Otherwise, your batteries are low, you MUST change then.
4)Press and release the UP Arrow Key on the remote until TV turns off. Notice the UP arrow key button is the button below the volume keys (Stop button for VCR.)
5)Make sure you are aiming remote control to TV while pressing and releasing UP arrow key button. When you find the right code, the TV will turn OFF.
6) Immediately after, TV turns off, press # key.
Posted on Aug 23, 2010
We would be happy to help with those two issues. First let's address your DISH Network remote to your Emerson TV. To check that the code works try severalfunctions on the remote to make sure it's the best code to use with your TV. Rememberthat some codes may not be compatible with your equipment. If this is the case,try the other codes listed for that device until you find one that iscompatible with your equipment. Remember to put your remote back into SAT mode once you're done.
Once you have your DISH Network remote programmed to your TV getting the game system to come up on the TV should be a matter of getting your TV on the input you have it connected to. This can be done by pressing the "TV/Video" or "Input" button on the DISH remote when it is in TV mode. If you are still having trouble with getting the game system to come up on your TV, call the Emerson Customer Service Department at: 1-800-256-2487.
We hope that this information gets you up and running. Thank you for being a valued DISH Network customer!
DISH Network Customer Service Representative
Posted on Mar 01, 2011
Tips for a great answer:
Feb 14, 2014 | DISH Network ES161256 21.0 IR / UHF Pro...
Jan 24, 2014 | DISH Network IR Remote Control
Jan 22, 2013 | DISH Network IR Remote Control
Jan 16, 2013 | DISH Network ES161256 21.0 IR / UHF Pro...
Mar 14, 2011 | DISH Network IR Remote Control
Nov 06, 2010 | DISH Network IR Remote Control
Dec 24, 2009 | Bell SH50102 Remote Control
Nov 06, 2009 | DISH Network IR Remote Control
Aug 17, 2009 | ViewSonic NextVision N2010 20 in. LCD...
216 people viewed this question
Usually answered in minutes!