Question about Logitech Quickcam Chat Webcam

1 Answer

Can't hear my sound playback on sound test with skype

I have a logitech 9000 webcam and am trying to hook it up with skype. I installed it all and then did sound test but playback was garbled and intermittent - unintelligible. Skype recommended that I go to my windows control and to sound devices and to sound playback and make default device ''sound MAX digital audio'', the one skype uses. However, all I get there is default device as c-media wave device and can't change it. I have no idea if this would solve my problem but they suggested this way to go and I can't get there. How do I get real sound on my skype?
Thanks.
Bob

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

After you install Skype and have it operational with you ID . Go to "TOOLS", click on "OPTIONS", nect go to "Audio Settings" and click on it. Make sure both the Microphone and Speaker's are correct Then "make a free test call" .Wait till the voice tells you to record. Then when finished talking waite for the test voice and the test persons voice to insue you audio transmition is work. Then go back to options and test your video.setting. Click on Video Settings and procede to set up you video camera. Also Visit this site to setup video.
http://www.skype.com/help/guides/video/
Hope this helps. Bud

Posted on Jan 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Logitech camera shuts off when on skype


Make sure you have the very latest software
Visit the Logitech website and browse the photo gallery for your model and click on the photo to navigate to the support page.
Note - Older models on page 2 - look for the link at the bottom right of page 1 and click on it "Still can't find your product?"

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

In addition to the Logitech installer you will need to run the support software - Microsoft DirectX . This comes pre-loaded on most Windows computers but has to be updated - I am currently on version 11
To start the DirectX Diagnostic Tool, click Start, click Run, type dxdiag in the Open box, and then click OK.

Procedure to re-install Logitech software
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Uninstall the current webcam software on your computer
Restart computer
Download the Installation package from Logitech
Run the installer and choose your options during the installation - You may not want Logitech Chat but the Desktop icon for the webcam toolbar is a must.
Connect your webcam when prompted.

Configure to Skype

Test your webcam here to make sure it broadcasts ok - Hit 'Allow' in the top window and check your cam in the left hand panel.

http://www.testmycam.com/
Not working ? - troubleshoot your drivers and software - get your cam working before moving on

Working OK ?

Set your webcam mic as default ( if it has a built in mic

Plug in the webcam

TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
Right click on the volume graph and select 'Show disabled devices' and 'Show disconnected devices'
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

When using Skype - do not run the Logitech software but allow Skype full control.

Aug 29, 2010 | Logitech Webcam

1 Answer

I have a logitech webcam it is a skype everthing works fine except i cannot hear the other person that i am on with my speakers are fine they can hear me but i cannot hear them what could be the problem?


If the problem is with just one contact its probably his mic setting at fault
Both check your set-up
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO SKYPE
Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

May 02, 2010 | Logitech Quickcam Chat Webcam

1 Answer

Problem with skype and web cam on windows 7


If you just downloaded the drivers, try restarting your computer so that the updates will register.

Apr 14, 2010 | Logitech Quickcam Chat Webcam

1 Answer

I have a Logitech Quickcam Pro 9000 with the latest drivers and the latest Skype installed. I can see the other person during a video call, but I can't see myself and they can't see me. Just a spinning...


hello, try to close all the quickcam software before you open skype. I think its a program collision. also check msconfig that no logitech program starts. click->start->run->write msconfig and click startup tab. uncheck all logitech. get back if it doe sent work

Oct 12, 2009 | Logitech Quickcam Chat Webcam

1 Answer

Using Skype with my Logitech QuickCam Pro 9000


The advantage of having a logitech webcam is the support you have.
I just launched my logitech toolbar and clicked on the lowest panel to see what help you have with your webcam in Skype - check this out

http://logitech-en-emea.custhelp.com/cgi-bin/logitech_en_emea.cfg/php/enduser/std_adp.php?p_faqid=9266&p_created=1227724918&p_sid=PlhfBfJj&p_accessibility=&p_redirect=&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD00NCw0NCZwX3Byb2RzPSZwX2NhdHM9JnBfcHY9JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1Mb2dpdGVjaMKuIFdlYmNhbSBQcm8gOTAwMA**&p_li=&p_topview=1

Also there is a good logitech forum from other users as logitech tends to have teflon shoulders when it comes to chat programs

Sep 29, 2009 | Logitech QuickCam Pro 9000 Web Cam

1 Answer

Sound problem on my logitech pro 9000 install on mac


Check quick time settings.

See if other video files played in quicktime have voice.

May 22, 2009 | Logitech QuickCam Pro 9000 Web Cam

1 Answer

Can''t hear voice of person I call using video Logitech 9000 cam


Normal 0 See section A. Skype in the info below to setup the Audio & Video.
Also send this to your family and friends so they have there computer setup properly.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
Hope this helps. Bud


Feb 19, 2009 | Logitech Quickcam Chat Webcam

2 Answers

Loaded Skype . My friend can't hear me talking.


try and change the audio settings under the tools menu option of skype and goto the general settings. You will find the audio and select for the correct audio device.

Feb 11, 2009 | Logitech QuickCam Pro 9000 Web Cam

2 Answers

Using logitech 9000 with google video chat, 5 second sound delay


Normal 0 Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Jan 12, 2009 | Logitech Webcam

1 Answer

Sound - no video


Both try using windows live and set up audio and video in the settings as you did with Skpe, as it's a similair programme and supports any camera. If that works better then Skype has a problem with your camera makes.

Feb 21, 2007 | Logitech QuickCam Orbit Personal Web...

Not finding what you are looking for?
Logitech Quickcam Chat Webcam Logo

1,204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Webcams Experts

gaucherre

Level 2 Expert

180 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

378 Answers

Pieter Vleeshouwers

Level 3 Expert

1421 Answers

Are you a Logitech Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...