Question about Belkin Connect N150 Wireless N Router
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need to just disable one of the option in the router,please follow the below steps
1.Type 192.168.2.1,in the Internet explorer,You will get a belkin router setup page
2.on your left hand side click on Wifi Protected Setup(WPS),it will asks for password,leave it blank and click on submit
3.It will say WPS enable,change it to disable and click on Apply Changes
4.Now try to scan and connect to the wireless networks
Posted on Mar 01, 2010
while connected to router, open internet browser and enter 192.168.2.1 into the address bar. this opens most belkin router setup utilities.
Posted on Mar 04, 2010
Follow the user Manual. It should be an easy setup.
Posted on Apr 12, 2010
SOURCE: I have Belkin N150 Rouer.
f the modem light keeps blinking, it means that the router hasn't been configured yet. Also, rarely, it can be an issue with WAN port/modem port on the router or the ethernet cable connecting the modem to router or finally, modem may not be working as its not applicable in this case(as you said).
1.Connect comp.--(gray port) router (yellow port)--modem
2.On the computer, open the router page by typing 192.168.2.1 in the address bar of browser
NOTE : IF YOUR INTERNET SERVICE PROVIDER IS CABLE FOLLOW THE BELOW STEPS
3.Under Internet WAN , SELECT the connection type as Dynamic.->NEXT
4.On the far left column, click on "MAC address" under Internet WAN.
5.Click on clone and apply changes and finally check Internet status
6.If internet status > Not connected, we need to do a network power cycle
7.For this, unplug the power from router, then from modem, then unplug the coaxial cable from cable modem.
8. Wait for 60 sec, then connect the coaxial cable, then connect power to modem, wait for lights on modem to get steady, then finally, plug in the power to router.
Now, you may see proper lights lit on the router.
All my best wishes for a fast internet service through the router.
FOR PPPOE OR DSL CONNECTIONS
1.Under Internet WAN , SELECT the connection type as PPPOE ->NEXT
2.ENTER THE USERNAME & PASSWORD PROVIDED BY YOUR IN INTERNET SERVICE PROVIDER
3.CLICK ON APPLY CHANGES
For any advanced help, revert asap!
Thanks and regards,
Posted on Jan 24, 2011
Tips for a great answer:
Feb 18, 2014 | Belkin Connect N150 Wireless N Router
Nov 29, 2013 | Belkin Connect N150 Wireless Router...
May 22, 2012 | Belkin N150 Enhanced Wireless Router...
Jul 09, 2010 | Belkin N150 (F6D4050) 802.11g/b Wireless...
Mar 04, 2010 | Belkin Computers & Internet
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: