Question about Kenmore 22.0 cu. ft. Side-By-Side Refrigerator with Filtered Ice and Water
Came home two days ago house had awful clorox smell in it, could not fiqure out where it was coming from two days later freezer is defrosted
use straight bleach on it. sponge down the whole inside with bleach and if you can leave the doors open on it to let it breathe and clear the odor out. bleach kills most smells if left on for awhile.go over it a couple of times if you have to to get rid of the smell.
Posted on Jan 17, 2009
Inside the fresh food compartment look for an opening that will allow you to turn the defrost timer clockwise slowly. When you hear it click the refrigerator should go into defrost. If the timer is bad it will need replaced. Let me know. Below is a photo of timer.
Part number 6
Posted on Feb 27, 2009
Good to see you put your model number down correctly. Do the lights come on inside when you open door? I noticed your refrigerator has a control board inside the fresh food section behind the control panel I want you to unplug the refrigerator and examine that board for burn marks or loose solder connections on both Sides. Then let me know what you find. Thanks, Sea breeze My email is firstname.lastname@example.org Web Site http://servicepartstec.blogspot.com/ Part Number for Control board is 8201528
Posted on Jun 11, 2009
He can't, although it's a good guess. However, The compressor can be tested and run with a special test cord most all techs have.
It allows the compressor to be run independent of the rest of the machine and is the definitive test. I would not go forward unless that test is performed. Compressors are too expensive.
Posted on May 12, 2010
Tips for a great answer:
Mar 25, 2014 | Refrigerators
Sep 28, 2009 | Kenmore 53502 / 53504 Side by Side...
Aug 08, 2009 | Kenmore Dryers
May 27, 2009 | Kenmore 50522 / 50524 Side by Side...
Jan 17, 2009 | Kenmore Refrigerators
Dec 01, 2008 | Kenmore 55612 / 55614 / 5561 / 655619 Side...
Nov 03, 2007 | Kenmore 44042 Front Load Washer
545 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: