Question about Uniden 5.8GHz Cordless Phone

Open Question

Saving Numbers to a Phone's memory

My 87 year old mother has a Betacom Phoenix SL30 corded telephone. It has numbers 1 to 9 and the bottom row is * 0 #. There is also a separate button marked R. My mother has lost the instruction manual. Does anybody know how to store numbers for recall in the phone's memory?

Posted by on

6 Suggested Answers

eagle338
  • 4889 Answers

SOURCE: Storing numbers in memory

1) Pick up the handset and press the STORE button
2) Dial in the number you wish to store
3) Press the STORE button again to indicate that you have completed the number
4) Press the location where you want to store the number (i.e. 1, 2, …9, or 0)

Posted on Oct 21, 2007

  • 86 Answers

SOURCE: change/add #'s in Memory

Find your model number and then click this link to download the manual

Manual page

Posted on Jan 20, 2008

informatica
  • 1113 Answers

SOURCE: phone

Hi - You can download the manual by clicking the link underlined in blue below:

dxa 1388 2

See page 23:

a8422e0.jpg

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

Posted on Sep 23, 2008

mohammed387
  • 1952 Answers

SOURCE: i lost my manual for the uniden cordless phone

phone.manualsonline.com/manuals/.../uniden/uniden_telephone_product_list.html -use this link

Posted on Jul 23, 2009

  • 279 Answers

SOURCE: need to erase numbers stored on speed dial

Go to uniden.com and look in customer service/manuals. They may have it to download. You'll need the model #

Posted on Sep 19, 2009

  • 55 Answers

SOURCE: don't know how to put phone numbers into memory

http://www.uniden.com/pdf/EXI7926om.pdf
the above link leads to the manual of the phone.. it not tells u about memory.. its got the entire manual.. go ahead.. good luck!!

Posted on Oct 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I hasve a Uniden CEZ260 Corded Phone and i am trying to reprogram the numbers in the speed dial locations how do i do that.


To assign or change youe speed dial. Do the following: 1. Press STORE. LOCATION? shows in the display. 2. Press the desired memory location (0 to 9 or quick call buttons A, B, or C.) NOTE: Press LEFT or RIGHT to scroll through 0 - 9 or quick call buttons A, B, or C to select a location. 3. Press STORE again to confirm the memory location. NOTE: Use Delete to erase existing memories or to correct errors. 4. Use the number keys to enter the telephone number (up to 32 digits) and then press STORE to save. 5. Use the number keys to enter the name of the person associated with the telephone number you just entered. More than one letter is stored in each of the number keys. Press the keys multiple times to scroll through the letters for that key. For example, to enter "B," press "2" twice. Press LEFT two times to create a space. NOTE: The flashing cursor automatically moves to the next position

Apr 18, 2011 | Uniden CEZ260 Corded Phone

1 Answer

I've lost my betacom 111 vogue phone manual and need to re enter numbers to the phone memory but can't remember how to do it. Hope you can help me Thanks


0clip_image001.png4. Using the 10-number memory

1. Ensure that the Vogue is plugged into your BT socket.

2. Lift the handset.

3. Press the Store button.

4. Key in the complete telephone number you wish to store.

5. Press the Store button.

6. Press the memory key (1-10) where you wish to store that number, for example 1.

7. When you have finished storing numbers, replace the handset.

Jan 24, 2011 | Phones

1 Answer

We have an old Unisonic model 9325 corded phone that has the capability to program phone numbers in it but cannot find the manual. Any way to get instructions on how to program with numbers?


I have an old Unisonic 9725, and the programming method for that phone may work for yours.
1. take handset 'off hook'
2. press: store
3. enter phone no.
4. press store
5. press memory button 1, 2, or 3...or 0-9
6. put handset back 'on-hook'

to use: take handset off hook, and press the memory number that applies.

Jul 03, 2010 | Unisonic (9742) Corded Phone

1 Answer

I need to know how to program the numbers into the speed dial option. My mother's phone is a table set with large numbers #29267A ... close enough?


Before you store a telephone number in memory, make sure the dialing mode is
correctly set for the type of service you have. The default dialing mode is tone
(touch-tone), so if you have pulse (rotary) service, you must first change the dialing
mode. See “To Set the Dial Mode.” The following buttons can be stored into any
memory location: 0-9.
STORING FREQUENTLY CALLED NUMBERS
1. Pick up the handset.
2.Press the store button.
3. Push the desired memory location button.
4. Press the store button.
5.Use the handset number keys to enter the telephone number (up to 16-digits)
and press the store button.
6.Hang up the handset.
NOTE: If you make a mistake, use the delete button to delete wrong digits.
CHANGING A STORED NUMBER
Repeat the storage sequence above. The new number replaces the old number at
the memory location.
ERASING A STORED NUMBER
1. Pick up the handset.
2.Press the store button.
3.Press the memory location (0-9) to be erased.
4.Press delete for three seconds until the number in the display is erased.
5.Hang up the handset.
DIALING FREQUENTLY CALLED NUMBERS
1. Pick up the handset and press the mem button.
2. Press 0-9 for the memory location. The number dials automatically.
OR
1. Pick up the handset and press the dial button.
2. Press the review button for the desired memory location.
3. Press the dial button to dial the number.
OR
1. Press dial button while the handset is still in the cradle.
2. Press the review button for the desired memory location, lift the handset and the
number dials automatically.

Download User Manual

If this information was helpful, please give me a big thumbs-up when you rate my answer. Thank you.

Feb 02, 2010 | GE 29267GE3 Corded Phone

1 Answer

How to program telephone numbers in memory?


Your phone (KX-TC911-B) can store up to 10 phone numbers. Numbers 0 - 10 are your memory stations.

1. Make sure the TALK indicator light is off.
2.Press Program. The TALK indicator light will start flashing.
3. Enter the phone number.
4. Press AUTO.
5. Press a memory station where you want to store a particular phone number.
6. You will hear a confirmation tone. 1 beep means the number has been successfully stored.
2 beeps mean, you entered the same number that has already been previously stored.
Click on the link if you would like to have a pdf copy of the manual/tutorials.

Jun 24, 2009 | Panasonic KX TC911B Cordless Phone

1 Answer

Enter memory data


Hello,
Here are the commands to run the phones memory dial (speed-dial).  I have included the instructions for deleting and changing numbers as well.  It is listed below.  I hope this helps you out.
Ken

MEMORY DIAL INSTRUCTIONS Store up to ten 20-digit numbers in memory for quick dialing. Storing a Number in Memory 1. Make sure the phone is OFF (not in TALK mode). 2. Press the MEMORY button. 3. Press a number (0-9) to store the dialed number in that memory location. 4. Press the MEMORY button again. 5. Use the handset number keypad to enter the telephone number (up to 20 digits, including pauses) and press the MEMORY button again to save the number. The unit beeps to confirm. 6. To enter another number in a different memory location, return to step 1 and repeat the process.
Storing a Redial Number 1. Repeat steps 1 through 4 in Storing a Number in Memory. 2. Press the REDIAL button. 3. Press the MEMORY button to store the number. You will hear a confirmation tone.
Changing a Stored Number 1. Repeat steps 1 through 6 in Storing a Number in Memory. 2. Press the MEMORY button to store the number. You will hear a confirmation tone. The old number will be overwritten with the new number.
Dialing a Stored Number 1. Make sure the phone is ON by pressing the TALK button. 2. Press the MEMORY button. 3. Press the number (0-9) for the desired memory location. The number dials automatically. Inserting a Pause in the Dialing Sequence Press the PAUSE# button once to insert a delay in the dialing sequence of a stored telephone number. A pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone). Each pause counts as 1 digit in the dialing sequence. If you need a longer pause, press the PAUSE# button twice.
Deleting Stored Numbers 1. Press the MEMORY button. 2. Press the desired memory location (0-9). 3. Press the MEMORY button twice to delete the entry. 4. You will hear a confirmation tone.

Jan 08, 2009 | GE 27928GE5 Cordless Phone

1 Answer

Audioline 20 Memory Speakerphone


1. Lift handset (releasing hook switch).or just press SPEAKER, ignore any noises or BT messages while you..
2. Press and release STORE key.
3. Press the keys for the telephone number
you wish to store.
4. Press and release the STORE key again.
5. Press the keypad number (0-9) you want
that telephone number stored in.
6. Your number is now stored.

Apr 01, 2008 | Audioline TEL 100 Plus Corded Phone

3 Answers

Programming a number for memory


Memory
Store up to ten 20-digit numbers in memory for quick dialing.
Storing a Number in Memory
1. Make sure the phone is OFF (not in TALK mode).
2. Press the MEMORY button.
3. Press a number (0-9) to store the dialed number in that memory location.
4. Press the MEMORY button again.
5. Use the handset number keypad to enter the telephone number (up to 20 digits, including pauses) and press the MEMORY button again to save the number. The unit beeps to confirm.
6. To enter another number in a different memory location, return to step 1 and repeat the process.

Nov 03, 2007 | Uniden Cordless Phone

1 Answer

ConairPhone SW324WCS


I just had same problem and went conairphone site and found model sw322 that looked about the same. I downloaded the manuel and it worked for my phone. Here it is. MEMORY FEATURE To Program Your CONAIRPHONETM telephone is equipped with 10 memories for programming your most frequently dialed telephone numbers. You can store up to 16 digits in each of the numeric keys (0 through 9), by following the steps outlined below: 1. Lift handset (releasing hook switch). 2. Press and release STORE key. 3. Press the keys for the telephone number you wish to store. 4. Press and release the STORE key again. 5. Press the keypad number (0-9) you want that telephone number stored in. 6. Your number is now stored. 7. To change a stored number, repeat the same process. The new number will store over the old stored number. A Memory Index card is provided for your use in writing down the person?s name. To Retrieve Memory Numbers Keypad Memories: To retrieve numbers stored in the keypad, pick up the handset and press the MEM (Memory) key. Then press the keypad number (0-9) which stores the telephone number you want to dial. Your call will be automatically dialed.

Jul 12, 2007 | Conair SW324WCS Corded Phone

1 Answer

Programming the "Memory Dialer"


You may try this: 1. Pick up the handset and listen for a dial tone. 2. Press and release the STORE button. 3. Enter the phone number(up to 16 digits)you want to store into memory(The telephone number will not dial out) 4. Press and release the STORE button. 5. Press a one-digit number(0 - 9)on the keypad to store the phone number into the desired memory location. 6. Hang up the phone by returning the handset to the handset cradle on the base. 7. To store more phone numbers in memory, repeat steps 1 - 6 Good Luck !!

Jun 27, 2007 | Northwestern Bell Classic Favorite 52860...

Not finding what you are looking for?
Uniden 5.8GHz Cordless Phone Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts

kakima

Level 3 Expert

96576 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7987 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...