Question about Hoover Dryers

Open Question

I need an operating manual for the Hoover nextra.7. Hnc 172

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
hards327
  • 30 Answers

SOURCE: How do i replace belt on condenser tumble dryer

you need to remove the whole front of the machine by removing the : top by the 3 screws at the back,then unscrew the screws across the front of the top of the bezel then remove,then open the door,remove the circle of screws then put the machine on its back,remove the screws at the bottom front of the machine,then lift the front bottom of the machine and slide it upwards then you should be able replace the belt then refit in reverse order good luck.

Posted on Mar 17, 2008

Ad
vickygomar
  • 460 Answers

SOURCE: Noisy when running need to check belt and bearings

i need the serial # to assist you better 
thank you

Posted on May 15, 2009

canwoodjc
  • 3301 Answers

SOURCE: i have a hoover nextra

the filter care light comes on when the machine is over heating so the "brain" thinks the lint trap is full , clean the entire venting system, including the outside vent cover and remove any debris , then unplug the machine for a few minutes and see if it resets

Posted on Jul 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My mums Hoover Nextra HNC 175 condenser dryer will not turn I have removed the top and the belt seems fine The drum will turn by hand but will not turn otherwise I have tried putting the power on and...


Try to physically turn the motor @ the pulley on the motor shaft. It sounds like the motor might be seized. If it does turn, there is a small fuse link on top of the motor that can be replaced. Good luck to you.

Jan 12, 2014 | Dryers

1 Answer

Need user manual for Hoover Nextra 7 hnf7167


http://diplo-best.com/314.php?k=e038c99806dfab996b06538e1a0bb163&ID=2326226&q=HOOVER%20NEXTRA

i have downloaded and checked this link and it is a multilingual user guide with troubleshooter so long as the link stays there. hope it helps, as hoovers site is one of the worst sites i have ever had to visit, it's manual search is hopeless links are about as illogical as you can get. lets hope they pull there finger out and get it rebuilt to a more user friendly site. please indicate if you found this helpful. cheers. mark.

Jun 20, 2012 | Hoover Washing Machines

1 Answer

I have a hoover nextra dryer hnc 170. The drum will not turn, and both the lights for filter care are on. I assume the reason it is not turning is because of the filter care light. Is there anythin i...


the filter care light comes on when the machine is over heating so the "brain" thinks the lint trap is full , clean the entire venting system, including the outside vent cover and remove any debris , then unplug the machine for a few minutes and see if it resets

Jul 04, 2011 | Dryers

1 Answer

Noisy when running need to check belt and bearings


i need the serial # to assist you better 
thank you

May 14, 2009 | Dryers

1 Answer

I need to download hoover washing machine manual HNWL7146-80


You can try going to http://www.managemyhome.com/ and looking up the model # there.

Mar 15, 2009 | Hoover Nextra HNWL 3126 Front Load Washer...

1 Answer

How do i replace belt on condenser tumble dryer


you need to remove the whole front of the machine by removing the : top by the 3 screws at the back,then unscrew the screws across the front of the top of the bezel then remove,then open the door,remove the circle of screws then put the machine on its back,remove the screws at the bottom front of the machine,then lift the front bottom of the machine and slide it upwards then you should be able replace the belt then refit in reverse order good luck.

Mar 14, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Dryers Experts

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Are you a Hoover Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...