Question about Singer Sewing Machines
Posted by Anonymous on
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: singer touch and sew 648
Thread the machine as if you were going to sew. When you thread the needle, pull the thread off to the left and wrap it around the thumb screw on the left and just above the needle. Wrap it only 2 or 3 times and hold the end of the thread. With bobbin in place and the face plate slid open, push the thumb lever on the left under the face plate to the left. Begin to 'sew'. As you do, the bobbin will wind and the thread you are holding will detach. Once the bobbin is full to the outside line, slide the face plate the closed position. As it closes, it will release the thumb lever. Put the needle in the slightly lowered position and slide something blunt under the pressure foot pulling thread from both the bobbin and the needle; cut the thread when you've pulled it out sufficiently.
Posted on Apr 16, 2010
Tips for a great answer:
Apr 05, 2016 | Singer Sewing Machines
Apr 24, 2015 | Sewing Machines
Dec 04, 2012 | Sewing Machines
Oct 18, 2012 | Sewing Machines
Apr 01, 2012 | Singer Sewing Machines
Nov 30, 2011 | Singer Sewing Machines
Oct 27, 2011 | Sewing Machines
Feb 02, 2011 | Singer Touch Sew 7462 Mechanical Sewing...
Dec 01, 2009 | Singer 7462 Mechanical Sewing Machine
68 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: