My LG WF T1022TP has water going in, but it come's straight out again ! leaving none in the drum to wash. Machine is second hand and has no manual. It has been plumbed in by a plumber. It does this on any setting I use.
Comments:
May 22, 2007
- Thank you. Guy coming back to move outlet hole further up wall !
Possible your outlet hose is at floor level; this must have a certain height, the height may be marked behind the machine. The hose should reach this height (approx 30 inches) from the floor level, and then go down into your wall outlet or whatever. The outlet pump pumps this water out over the height. Check this out.
Was this helpful?
Yes
No
Popular Solutions for LG WFT1071TP Top Load Washer
my lg washing machine wf-s6607tc soon after start washing it stops then spin and drain lights comes....
(More)
MY LG WASHING MACHINE WF-S6607TC SOON AFTER START WASHING IT STOPS THEN SPIN AND DRAIN LIGHTS COMES. AFTER READING THIS SITE I GOT TO KNOW THAT THERES A MAGNET ON THE TOP FRONT COVER. SO I BEGAN SEARCHING FOR THE MAGNET. BUT ITS GONE.. SO WAT ELSE CAN I DO?
Machine cycle but over flow as if load sensor is broken , The machine does not complete cycle and...
(More)
Machine cycle but over flow as if load sensor is broken , The machine does not complete cycle and once first part of cycle is in motion it over flow. Please send drawing of machine and where load sensor is located.
My fully automatic Fabricare LG machine just stops before the spinning process has to begin. We need...
(More)
My fully automatic Fabricare LG machine just stops before the spinning process has to begin. We need to rearrange the clothes or spin twice reducing the quantity to half.We do not over load the machine too. And some muck gets on the clothes from some part of machine. Please help.