Question about RCA RT2250 System
I have RT2250/RT2250R RCA receiver. I was trying to setup my RCA remote for Comcast cable, Sony DVD but did not find code in booklet.
Where can I find code for these two components and how to setup remote?
Thanks in advance
SOURCE: rca rt2250 no sound
please give us more details, I don't know what reciever you want to use? AM,FM? or some other devices.
but if it's the am,fm reciever well you can find it in your instructions manual how to set it though.
just follow the steps and you will have it..
have a nice tunning
just don't rate me badly^^
make sure your antenna is connected properly..
Posted on Feb 17, 2008
1. Turn on the device you wish to program.
2. Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH.
3. Press and release the device button for the device you are programming (TV, VCR or DBS•CABLE). The INDICATOR LIGHT will blink once then remain lit. DVD codes are programmed under the VCR button. Note: For AUX, press DVD•AUXthen the device button you are assigning to DVD•AUX. 4. Press and release ON•OFF until your device turns off. Important: You may have to press ON•OFF up to 200 times. 5. When your device turns off, press the ENTER button, the INDICATOR LIGHT will go off
Posted on Apr 21, 2008
After hours of research I managed to find a code that works. It does not control the built in DVD player but just having to power and volume functions is a life saver for me.
The code is 12002.
Posted on Dec 01, 2008
Tips for a great answer:
Jan 21, 2016 | RCA Televison & Video
Mar 22, 2013 | Televison & Video
0154, 0236, 0463, 0180, 0282,
0178, 0179, 0038, 0177, 0280
The Comcast Custom 3-Device universal
remote control is preprogrammed at
the factory to operate the Cable Box
supplied by your Comcast system, an
RCA TV, and an RCA VCR (in the AUX
mode). To control devices other than
default brands (excluding the Cable
Box), perform the below steps; otherwise
skip this section:
1* Turn on a device (e.g., VCR or DVD
Player) and, if applicable, insert
media, (e.g., video cassette or disc).
NOTE: Please read steps 2 to 6 completely
before proceeding. Highlight or write
down the codes and device you wish to
program before moving on to step 2.
2* On the remote control, press a
device key once (i.e., AUX or TV).
NOTE: Use the AUX key to program
control of an Audio Amplifier or
Receiver, a DVD Player, a Home-
Theater-In-A-Box Device, a PVR (or
DVR), or a VCR.
3* Press and hold Setup until the
selected mode key blinks twice,
then release Setup.
4* Locate the code for your device in
Manufacturer's Codes on the back
of this user guide. Brands are listed
in alphabetical order with the
most popular codes listed first.
5* Enter the first four-digit code for
your device. If you perform this
procedure correctly, the selected
mode key will blink twice.
NOTE: If you enter an invalid code, the
selected mode key will display one long
blink and exit the programming mode.
Repeat steps 2 to 5 with a valid code.
6* Aim the remote control at your
device and press Power once. The
device should turn off. If it does
not respond, repeat steps 2 to 6,
trying each code listed for your
brand until you find one that
Searching For Your Code.
NOTE: If the device does not have a
Power key, press the (Play) key
Aug 22, 2011 | Televison & Video
May 05, 2010 | RCA RT2250 System
Jan 20, 2010 | Sony DAV-BC150 System
Aug 06, 2008 | Audio Players & Recorders
Dec 31, 2007 | Olevia LT42HVi 42 in. LCD Television
Dec 04, 2006 | RCA 20F510TD 20 in. TV/DVD Combo
578 people viewed this question
Usually answered in minutes!