Question about Nordic Track Nordictrack C2200 Treadmill Walking Belt Ntl109052
The reset switch is to close to main switch, reset it. See your instruction manual in section troubleshooting. for identify the reset switch. or download your instr. manual from www. fitness.manualsonline.com
God bless you
Posted on Nov 07, 2012
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Sound like function pad or upper console I don't know if you can purchase the function pad, but you may have to purchase the entire console and that may quite expensive.
Posted on Apr 21, 2010
Type into the serch, icon health and fitness, then click on the customer service, then click onto the manuals and the instructions should be in the owners manual.
Posted on Jun 29, 2009
I know it's been months, but, if you still have this problem try this: 1. remove the philips screws holding the motor/belt/electronics cover on: you can lay the whole thing on it's side and remove them from the bottom. there's two in the front and two on the sides.
2. Obviously, unplug the unit! before doing anything. lay the unit back on it's feet (normal position)
3. Find the incline motor assembly. it will be int he middle of everything. black tube thingy.
4. take a cordless drill with a flat head screw driver bit, and turn the incline motor CCW. until the bed is flat.
5. what what I have read, you should shop for a new incline sensor. these fail before the motor does.
Posted on Jan 26, 2010
If everything on the display console is working correctly then we know it is either a problem with the wires from the console to the controller or the controller itself. In most cases this means you need a new controller. To verify, take off the motor hood and find the green circuit board called the motor controller. With the power on go into manual mode and push the speed up button to a slow speed. If you see an LED light with "spd ctrl" next to it flickering but the belt still does not move then we know the problem is with the controller sending the signal to the walking belt, in which you should check the wires that go to the motor. If they are connected correctly then we know a new controller is in order. If you do not see a flickering light then it means the speed signal never got there and the problem will be with the wires going from the console to the controller. This is called an upright wire harness.
Posted on Aug 18, 2010
I had the same problem with my Nordic track. I pressed every button until I found the one that did not beep. The one that does not beep is stuck. My problem was with the Ifit button. The first few times I would push the bad button until it started beeping. That worked for awhile (couple of weeks but started up again). I disconnected the Ifit unit and now the thing work fine except for Ifit which I never used. Nordic track wanted to sell me a new console which cost more than the machine.
Posted on Oct 31, 2010
Tips for a great answer:
Apr 02, 2013 | Cameras
Feb 07, 2011 | Adobe Illustrator® CS3 13 Full Version for...
Sep 19, 2010 | 1999 Chevrolet Silverado 1500
Nov 26, 2009 | 1996 Chevrolet C3500
Oct 22, 2009 | Nordic Track Nordictrack Futura 2200...
Mar 02, 2014 | Nordic Track Nordictrack C2200 Treadmill...
Dec 13, 2013 | Nordic Track Nordictrack C2200 Treadmill...
118 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: