Question about JVC Model Sea-v7e - 4 Channel Sea Controller Equalizer

Open Question

How do I connect JVC Sea V7e 4 channel controller equalizer to my HiFi?

I am confused e.g: by the channels and the system A + B. How do I have to connect to get most units (CD, tape, phono and tuner) with best use of both systems A and B?

Posted by on

  • urs von Planta Nov 08, 2012

    What does the S.E.A functionality in an equalizer means?

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: Setting Up Surround Sound with satellite tv digital tuner

What model do you have?

You should be able to plug the audio/video output from the satellite TV system into the audio/video input on the JVC system. Then set the JVC system to the appropriate input.

I need to know the exact model to know how or if this is even possible. Some JVC models don't let you input any additional devices. Others might not have the inputs that are necessary for surround.

Posted on Mar 19, 2008

Ad
  • 1 Answer

SOURCE: I have a JVC FS2000 stereo. I want to play my IPOD/MP3 system

You'll need a RCA to mini jack cable and plug it in the line-in of your device!

Click here for a picture of this kind of cables: http://www.graficall.nl/Productimages/5781P.jpg.

Good luck!

Posted on Jan 18, 2009

freetek
  • 5568 Answers

SOURCE: My remote wont change channels

I need to use the cable remote to change the channel and the TV remote to change volume.
That is because your TV is looking at the output of the cable box (probably on channel 3 or 4) so the TV has to be statically tuned to see the cable box's output.
On the second question; I, and perhaps others, can't answer this without spending a lot of time to download manuals for both systems while you have them (presumably, since they are new) on hand. You didn't include the TV's model number anyhow so even that wouldn't be adequate.
The home theatre may have a receiver but what does it receive? Unless it also has channel capabilities that correspond to cable channels, it can't. The typical routing should be from the cable box to the TV S-video input and the sound can be routed separately from the cable box to either/or both, the home theatre's and also the TV's audio inputs.
When I am installing new stuff, I make a sketch of the routing I want (or have) to use. To me, this is less confusing than the supplied instructions.      

Posted on Feb 01, 2009

  • 814 Answers

SOURCE: channel lock

http://books.jvcservice.com/Download/558004078/52022IEN.pdf Use this web link to the JVC customer support website . On the website you will find a pdf copy of the owners manual for your model television set. It will explain how to reset the password and unlock your television. You will find the information you are looking for on page 14 and 15 of the owners manual. I hope this information helps you solve you problem with unlocking your television. Thank you for using FixYa and have a nice day!

Posted on Jun 20, 2009

homearceo
  • 66 Answers

SOURCE: JVC SEA-M770 COMPUTER CONTROLLED GRAPHIC

This is the service center. WINTER SNOW MARKETING

#106 Kapiligan st., Brgy Dona Imelda, Quezon City
Tel. No.: 742-7841.
JSS ELECTRONIC SERVICE CENTER Seneca Plaza Bldg., #1152 E. Rodriguez Sr. Avenue New Manila, QC
Tel. No.: (02) 377-8654
Fax No.: 727-9298
E-Mail Address: jvcwq@i-next.net

Posted on Jul 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok I have an Onkyo HTS8409 Network A / V Home Theater System - 7.1 Channel, and dvd player and want to know how to connect a equalizer technics sh-GE70 but i dont have a cassete deck


Equalizer is connected in between the deck and the reciever. Deck into the input of the equalizer, and the out of the equalizer goes into the tape input on the reciever.

Sep 26, 2013 | JVC TD-W118 Single Cassette Deck

1 Answer

Mixer and an EQ & amp ?


The order is mixer, equalizer and amp. The output of the mixer connects to the input of the equalizer and the output of the equalizer connects to the input of the amp. The equalizer has three types of input and output connections. They are XLR, 1/4 inch and screw terminals. The mixer will have one or two of the three. Choose XLR if possible on the mixer, choose line level output on the mixer if possible. A XLR male to female cable is needed for the connection. The equalizer has two channels, if the mixer has two output channels the two output channels of the mixer can connect directly to the two input channels of the equalizer. If the amp has two input channels, the two output channels of the equalizer can connect directly to the two input channels of the amp. If the mixer only has one output channel then only one channel of the equalizer can be used and one channel of the amp likewise. A XLR male to female connection cable can be used to connect the equalizer to the amp.

Jun 23, 2010 | DBX 1215V Home Equalizer

2 Answers

I HAVE A MAGNAVOX TV MODEL 255102-OODD, A MOTOROLLA (VERIZON) SET TOP BOX MODEL QIP2400/1006 AND A JVC DVD MODEL DR-MV150BJ. I HAVE TRIED ALL THE HOOK-UPS SUGGESTED BY JVC AND STILL CONNOT GET A PICTURE. ...


ok, The issue will be in the sequence you have things connected. The connections sequence is going to be controlled by what connections are available. I assume the Set Top controller is connection to your Antennea connection on the TV. Your TV should be on channel 3 or 4. The next step depends on what type of connectors you are using for the JVC DVD. I have an Antennea output on mine so I connected them in series. If you don't have an Antennea output from teh DVD player you will need to connect the DVD using Audio/Video cables which means you will need to connect to the TV alternate Source connector and to watch DVD's you will need to change to that source. Much like you would switch between regular TV and VCR tape on a VCR player connected to the Antennea connector.

Sep 23, 2009 | Televison & Video

1 Answer

Yamaha RX100bike in 4 gear modified it 5 gear


i have universal remote control philips , i need a program code for mini hifi philips

Feb 14, 2009 | Yamaha Digital Sound Projector YSP-800S -...

1 Answer

My remote wont change channels


I need to use the cable remote to change the channel and the TV remote to change volume.
That is because your TV is looking at the output of the cable box (probably on channel 3 or 4) so the TV has to be statically tuned to see the cable box's output.
On the second question; I, and perhaps others, can't answer this without spending a lot of time to download manuals for both systems while you have them (presumably, since they are new) on hand. You didn't include the TV's model number anyhow so even that wouldn't be adequate.
The home theatre may have a receiver but what does it receive? Unless it also has channel capabilities that correspond to cable channels, it can't. The typical routing should be from the cable box to the TV S-video input and the sound can be routed separately from the cable box to either/or both, the home theatre's and also the TV's audio inputs.
When I am installing new stuff, I make a sketch of the routing I want (or have) to use. To me, this is less confusing than the supplied instructions.      

Feb 01, 2009 | JVC LT-42X579 42 in. LCD TV

1 Answer

JVC television-lost old remote-have universal /can't add channels


I don't have an answer for your question.

However, I do have a suggestion. You can hook up a vcr to your tv, then put the tv on channel 3 or 4 (whichever the vcr is set for) and change the channels through your vcr. You have to have the cable go first to your vcr and then out to the tv.

Dec 19, 2008 | JVC AV-27530 27" TV

1 Answer

Have a hp DC7100 minitower pc with 4 dimms slots currently have 2 512's installed and thougth maybe adding an additional 2gig dim basically filling 3 of the dimm slots is this configuration valid





■The system will operate in single channel mode if the DIMM sockets are populated in one channel only.
■The system will operate in dual channel Asymmetric mode if the total memory capacity of the DIMMs in Channel A is not equal to the total memory capacity of the DIMMs in Channel B.
■The system will operate in a higher-performing dual channel Interleaved mode if the total memory capacity of the DIMMs in Channel A is equal to the total memory capacity of the DIMMs in Channel B. However, the technology and device width can vary between the channels, For example, if Channel A is populated with two 256 MB DIMMS and Channel B is populated with one 512 MB DIMM, the system will operate in Interleaved mode.

Oct 15, 2008 | HP Computers & Internet

1 Answer

Hook up to Ritron EQ


record out-------equalizer in---------equalizer out-------playback in.

Sep 04, 2008 | Spectrum Technical Hifi EQ-B5100...

1 Answer

Only one channel has no sound


multi system?check the system setting.set to channel 4 press the sond system button dk,bg,i,m will appear.observe the sound as it change.hope this help u....

Feb 28, 2007 | JVC AV-27D303 27" TV

Not finding what you are looking for?
JVC Model Sea-v7e - 4 Channel Sea Controller Equalizer Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75581 Answers

 Grubhead
Grubhead

Level 3 Expert

5487 Answers

Are you a JVC Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...