- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Guest, the ERR is not a good thing. Try a factory reset found on page 129 of the manual. On the left side of the camera is the terminal cover, inside below the USB connector is the reset switch. If that does not work then it will need to go to Nikon.
hi.. This screen shows areas of the photo that are overexposed slightly. It flashes them to help you. You get to this screen by pressing the up or down arrows when displaying the pictures you have taken.
To change it just press the up arrow when the camera is showing the screen until you get a display without flashing.
Once you have done this the display will be steady. If you get any other screen in future you may have accidently pressed the arrow again. Just cycle thru the displays to get back to steady.
You can reset the camera 2 ways... soft reset is to remove and replace the battery. To hard reset, there is a microswitch on the bottom of the camera body opposite from the battery compartment. Youll have to reset the camera's clock if you do this. If it still doesnt work, have a Nikon authorized camera shop look at it.
Try reseting the camera. Here are the instructions that are taken from this Kbase article:
"Turn on the camera and then press the Snapshot button ( on the top, right hand side of camera) and the Operation Mode button simultaneously for more than two seconds. This deletes all files from the camera "