Replace printer head with brand new one sent to me by lexmark. when i press copy the print slides to the opposite end and starts banging at the end of printer then i get error massage printer head can not move

After you changed the printhead, even full cartridges need some time to fill up the head. So just copy a newspaper, put in a normal sheet of paper, and tell the printer it is a Photo, with Photo paper. It then will press the most ink.
If one of the colours start, it could take a complete A4 photo, before all colours are coming through.
I assume you did install the new head correct and not something else was defect before you started to change the head anyway. Because when something else was defect in the first place, a new head won't change that.

Are you able to make copies using the Black Ink?

To scan pages in color, open Lexmark Printer Home > Advanced Scan. If you're still having problem with the print, please contact us at http://bit.ly/boldchat or [email protected] .

Hi there maximum time we found it is a the head problem. The print head is what the cartridges sit in inside of the printer. For resolve the problem please follow these.
Open the printer and wait for the carriage to slide over. Some how if its not come then Unplug the printer & Manually slide the carriage. Now Remove the ink cartridges from the print head & Use wet warm cotton swab or use alcohol to thoroughly clean the print head. Repeat this until there is no ink residue coming off on the cotton swab. After finished it make the head dry then fix it back. Now Try to print something now If that does not work then follow the next step.
Remove the printer data cable & restart the PC & printer. Then fit back the data cable & turn on the printer. Hope that's start working , if no luck then Uninstall the printer driver & restart the PC & Printer both again. Now install the driver of the printer and connect it with PC ,Turn on printer & go for a test print from the printer preference. Thanks & waiting for your reply.

The print head is clogged.Try powerful cleaning:
Press menu, then start black copy, then four times arrow-up quickly after another.Machine will be in maintenance mode
(all lights will flash).
Press 7-6-4 and OK (or start-black-copy).
When finished press 7-6-3 then start black copy,
printer will do a power purge.
Leave maintenance mode by pressing 9-9.
If this not help better think about new printer, because cost of repairing this one is profitable.

How old is the printer? if it is 4-6 years old, you may need to search for a replacement because lexmark printers are very technical. You can probably call lexmark because i had this problem. They sent me a free printer!!!

new printer $45@walmart printing results..........priceless

try cleaning the heads with the fix on the printer help screen.go to-- help--type in printer copier won't copy- look for how to clean the heads of the ink pores. or try align cartridges. when you install new printe ink or the cartridges come with the machine you have to aline to keep the ink flowing right.

whats wrond the lines are breacking with the black ink just put in 2 new catridge

There is no point in removeing a brother print head unless one is replacing it with new, not cleanable totally different print system to most brands. Head burns out heater elements, rather than blocks.

Yes remove every screw in top cover, all cables and post.

print head detached from rail by sliding to left end then back and up.

You are wasting your time trying to clean a brother type print head.