Question about JVC AV-36D303 36" TV

1 Answer

JVC 36 My JVC 36" TV will not power on and has a blinking power light. I have opened the back and checked all the fuses, which turned out to still be good. The TV stopped working after I tried hooking it up to a generator during Hurricane Ike. Any suggestions? Thanks! Dave W.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • JVC Master
  • 19,396 Answers

Hi Dave: "My JVC 36" TV will not power on and has a blinking power light."

That means that the protection circuit has started because a fault had been detected.

If this happened after a power surge it is likely a faulty PSU board.

Try first leaving the set unplugged from power outlet for few hours, this will drain power, reset the protector, and fix problem related to accumulation of electrostatic charges on PSU power capacitors.

If unplugging does not work, that means that there is an internal fault.
If this happened after a power problem of some kind, that means that probably one of the capacitors on powr board had blown, and must be replaced.
The TV must be tested by a technician to find the fault.

Posted on Jan 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv not coming on has a blinking power button


Toshiba CX36F85 36" TV Blink - Questions - Fixya

www.fixya.com > ... > Toshiba > Toshiba CX36F85 36" TV
Toshiba CX36F85 36" TV, blink related issues. ... Every brand TV will have its ownblinking ... stand by light blinks 6 times, wont power on tv is only 4 years old. ...From the number of blinks occur at one time switch ON, you can get an idea ...

Toshiba CX36F85 36" TV Blinks - Questions - Fixya

www.fixya.com > ... > Toshiba > Toshiba CX36F85 36" TV
Toshiba CX36F85 36" TV, blinks related issues. Get free help ... Every brand TV willhave its own blinking codes. From the ... Push power button and it ... and then ... stand by light blinks 6 times, wont power on tv is only 4 years old. Junk! it wont ...

Toshiba power light blinking not turn Standard (CRT ... - Fixya

www.fixya.com > ... > Standard (CRT) Televisions

Jan 10, 2016 | Toshiba CX36F85 36" TV

1 Answer

JVC Model AV-36D502 Blinking power light on start-up


you probably have some sort of overheating or short on the internal board - is it still on warranty? if so they will fix at no charge - if not, a local repair shop should be able to correct the problem but it may cost as much as $150

Jan 26, 2008 | JVC AV-36D502 36" TV

1 Answer

Tv just went off in use. Power light blinking, will no turn back on


Set is in shutdown as a short somewhere.

If model indicated here is correct someone has to open it and check voltages in power supply first.

Apr 01, 2012 | Toshiba 36AF43 36" TV

1 Answer

My JVC AV-48WP55 only blinks the green led when plugged in. This happened after a power surge, during a thunder storm.


Have you tried unplugging the tv and letting it sit for a while then plugging it back in?

also.. sometimes i have seen appliances that will flash the power light if an internal fuse has blown to indicate a problem. open it up if you feel you want to and check for a fuse around where the power cord comes in teh tv.

Nov 18, 2009 | JVC Televison & Video

1 Answer

Blinking timer light, No picture or sound.


Ur high voltage is dead,the FBT,the flyback transformer,the big black block of plastic with a red wire with a cap hook to the CRT(tv tube).That is dead.

Sep 27, 2009 | JVC AV-36D302 36" TV

1 Answer

JVC 36" TV will not power on and has a blinking power light...


Hi and welcome to FixYa,

Almost always, when an electronic device/equipment fails when powered with and by a generator, it is the power supply unit (PSU). The PSU circuitry expects a fairly constant/stable power source (120 or 220). The output of the generator tends to fluctuate especially under varying electrical load. Additionally, the AC frequency (60Hz) of the generator's output also tend to vary which most PSUs don't like. A noteworthy point to consider is that the generator is floating electrically, its output has no reference to earth/ground.

If you are considering a DIY (do-it-yourself), foremost to inspect would be the PSU particularly the regulator transistor and determine if it outputs +5 and ~+135 VDC. Another to check would be the HOT (horizontal output transistor). If when the TV was used powered by a generator, there was considerable vertical rolling, the vertical deflection IC would also be a suspect.

A friendly reminder, exercise caution when repairing TVs. It stores up EHV (extremely high voltage). It would be to your advantage to reference a service manual (JVC AV-36D303) or at the very least a schematic diagram with voltage readings.

Good luck and Thank you for using FixYa.

Jan 05, 2009 | JVC AV-36D303 36" TV

1 Answer

JVC tv i'art blinking timer


It is protecting you and itself with high probability.
Power supplies in modern electronic devices are designed to cycle if there is a fault in circuitry they are servicing and because of the design, also will not turn on completely if they are failing.

The older style of power supply was 'dumb' and unable to do this so could cause fires if the failure wasn't teh 'right' kind to blow the main fuse.

I agree with the manual; this is a job for a tech.

Aug 23, 2008 | JVC AV-32260 32" TV

2 Answers

No picture but sound is perfect


Sounds like the video output has a problem. Maybe missing the 200 volts from the High voltage transformer. The vertical circuit may have an issue. Either way it's hard to diagnose without looking at it. If you need a technician contact JVC online at: http://maps.jvc.com/cAscList/ Good Luck

Apr 29, 2007 | JVC AV-36FA44 36" TV

2 Answers

Tv wont turn on


check if the main fuse blew up. good luck!

Feb 09, 2007 | Sony FD Trinitron WEGA KD-36FS130 36" TV

Not finding what you are looking for?
JVC AV-36D303 36" TV Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72256 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...