Question about RCA RTDVD1 System

1 Answer

My dvd player plays all DVDs in Spanish if the option is avail.

I don't have the original remote, I had to program a Universal remote. The RCA model number is RTDVD1

Posted by on

  • cherlinden Jan 05, 2009

    Well I figured out how to get into the info menu button and change the language setting, but it always goes back to spanish once the dvd has been re-started. Somehow this player has been set to spanish in some other setting I assume. I tried resetting the factory settings, but I can't seem to get it to reset anything that I've noticed.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 73 Answers

Some how with that remote, you need to get into the setup of the DVD, and change the SAP or Secondary Audio source. It is set to spanish or to #2 #3 or such.

Charles

Posted on Jan 05, 2009

  • charles durando Jan 05, 2009

    Language code 6978

    http://support.radioshack.com/support_vi...

    Page 29, follow instructions to enter language code above for english


  • charles durando Jan 07, 2009

    did that work for you?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the rca remote control programing code for a Curtis dvd6041 DVD home theater


RCA remote control have no set-up code to Curtis devices. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Oct 12, 2016 | RCA Home Theater Systems

1 Answer

Need code to program magnavox mwd200f dvd playe with univeral remote


go to internet search...universal remote control codes for magnavox. one of the web sites has the answer.

Jul 02, 2012 | Philips Magnavox/Mwd200f Dvd Player No...

2 Answers

Need program codes for one for all remote\


Which One For All remote do you have? The manuals and code lists for most are available here: http://www.oneforall.com/support/manual . Use the drop down menus to select Universal Remote Control and then the specific remote model. Then click on the link to the manual.

You may need to program the amplifier and the dvd player separately. The codes below are for the URC-9960.
RCA Audio Amplifier codes: 1023, 1254, 0531, 1390, 1609
RCA DVD Player codes: 0522, 0571, 0717, 0822

Please note that universal remote controls only have codes for devices released 6 months or more before the remote was programmed. If your Home Theater System is newer than your One For All remote, you may need a newer remote.

I hope this helps.

Cindy Wells

Jun 24, 2011 | RCA RTD215 Theater System

1 Answer

I lost original RCA RTD155 remote and want to know where to get one,or can I use a universal one


I would recommend getting a Logitech Harmony remote. The benefit of this universal remote is that you can program macros to start all of your devices in whatever order you want them to turn on so you can have programs like "Watch DVD or Watch TV", the remote will switch your TV to the appropriate input and output channels.

 

The other good thing about this remote is that you can program buttons specific to your device. You simply plug this into your computer and type in your model number and it loads all of the codes automatically. The RTD155 is supported by the Harmony series.

 

Read more about them here:

http://www.logitech.com/en-us/remotes/universal-remotes

Mar 06, 2011 | RCA RTD155 System

1 Answer

I Need the five digit remote code for a RCA RTD215 DVD player to program into a universal remote


What is the make and model of the universal remote? They each have their own sets of codes, so there's not a code for your DVD that works with all universal remotes.

Post back the make and model info using the "add comment" button, and I'll do my best to look up RCA DVD player codes for it.

Apr 15, 2010 | RCA RTD215 Theater System

1 Answer

Lost the remote to our system


You can use an universal remote, but you will probably need to program the universal remote using the slow and complicate auto program feature, since the codes for many home theaters are not available.

Alternatively you can purchase an original replacement from one of the sellers below:


Replacement Remotes

1-800-Remotes

TV VCR DVD Stereo Remote

Best Replacement Remotes

Remote Controls Incorporated

123 Remotes Replacement Remote Controls

May 05, 2009 | Home Theater Systems

1 Answer

Universal remote


You can try a code seach which many universal remotes will do, this may be called auto search, if you have the manual for the RCA see if it is listed, instead of entering a 3 digit code, you cycle through all codes until the correct one responds to the unit you are trying to program.

Feb 12, 2009 | JVC TH-G30 Theater System

1 Answer

What is the remote conrol code for an RCA A/V Receiver?


If you are looking for a code to program a universal remote, you probably won't find one. Universal remotes are for TV DVD VCR and Cable boxes. A replacement remote might be found at MCMelectronics or Vance Baldwin. I would guess $40-$60

Jan 14, 2009 | RCA RT2500 System

1 Answer

RCA RT2280 surround sound mode button wont select 5.1 dolby digital mode.


I had the same problem and this is what I did to fix it. Assuming that all of your equipment is powered on, (tv, blu-ray/dvd, rca receiver) you'll need to go into your dvd players audio menu and select the dolby digital audio.
Once you do this, the digital signal is sent to your receiver from the dvd. The receiver should automatically set itself to the dolby digital preset. If it doesn't, press the surround button until you reach it. I found part of this information here. And the rest was personal experience.
Also, it depends on if the disc format is in dolby 5.1. I hope this helps you.

Dec 18, 2007 | RCA RT2280 System

Not finding what you are looking for?
RCA RTDVD1 System Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Home Theater Systems Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Ismael Lopez

Level 1 Expert

31 Answers

Are you a RCA Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...