Question about Protron PLTV-32 Television

2 Answers

Power Supply bit the dust

I need a new power supply for this TV, and I am not able to find one anywhere. It is UL listed, so it has to have an equivalent in the US, I just don't know where to get it. Thank you for taking the time to answer, Michael

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: Power Supply bit the dust

I have it on order 12 weeks I just called on B.O. with NO DATE

Posted on Jun 03, 2007

Re: Power Supply bit the dust

Sear sells replacement power supplys for Protron televisions. Here is the website Just search for PLTV32c and it will pull up a list of parts they sell. The power supply will cost you about 300 bucks.

Posted on May 29, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Sony Bravia KDL-46NX810 shuts off with 3D input only

Well written question but I would first call Sony Customer service to see if known issue or if the data base shows any reports or recalls for this issue.......

Oct 29, 2012 | Sony KDL-46NX810 46 in. 3D LCD TV

1 Answer

Turn tv on, audio but only flashing pic, then turn off and turn back on same thing, 3rd time have full pic

This problem will occur under two circumstances
1, Faulty electrolytic capacitors in the power supply board
2. Faulty back light inverter board.

Fist of all check is there is any faulty capacitors in the power supply board. If you find or not try to replace all the electrolytic capacitors in the power supply board. In most cases this will solve the problem. I have added the some video which will help you

The second one is the inverter back light inverter board. There is no repair possible with the inverter board. You have to replace the board with a new one. As you didn't mentioned any model number of your tv its not possible to attach a picture of the exact inverter board. The back light inverter board will look like one in the picture



Feb 09, 2012 | Sanyo 42 in. LCD TV

1 Answer

I went to turn on my Samsung a little bit ago, which was working earlier today, and now it won't turn on and is making a clicking noise. The noise does not stop until 10 seconds after I unplug it...

The tv power supply board it got short and already dead some how,tv have clicking noises mean ur tv power supply board are not stable and not regulating high voltages to the rest of the tv other boards.The tv power supply board that the board where the a/c power cord plug into it.Tries websites like, to buy a whole new refurbish tv power supply board for the replacement.

Aug 13, 2011 | Samsung LN46A650 46 in. LCD HDTV

2 Answers

I have a Westinghouse lvm 37w1 tv and it keeps turning itself off sometimes it will let me turn. it back on and sometimes I have to wait a few minutes do I need to buy a new tv can I fix this myself


It's the problem of overheating in the power supply board of the TV.on the power supply board of the TV there are few capacitors and IC.any of this IC is got short or may be due to this when you start the TV the current passes from electric outlet to the power supply board of TV.but when the current passes from that weak/faulty part at that time current gets stopped or slow and the board overheats and TV shuts off. this is a common problem faced by many other users too.the possible option to solve this issue is to check the power supply board by a meter and continuity tester and replace the faulty component on the board which is short due to which power supply board is getting overheated.its bit technical job but yes its not at all a costly repair to do or get it done by the technician. for required parts it can be easily available from local electronic hardware shop.

I hope this will help to solve the problem....

May 10, 2011 | Flat Panel Televisions

2 Answers

I have a Panasonic 32 inch HDTV. TV worked great until one day tried to turn on and nothing. It acts like it has no electrical power. We have tried plugging into different outlets with no luck. The red...

One simple solution may be to replace the power cable or the power strip that the TV is plugged in to. If you cannot get any power to the TV even after this step, it is most likely a motherboard or some sort of circuitry issue. Make sure you are using the physical buttons on the TV when trying to turn the TV on; leave the remote out of the equation. If it still does not come on, your TV may be far gone. HDTVs have a lifespan these days of anywhere between 3-5 years for plasma, 5-7 years for LCD, and the new LED tvs are supposed to last anywhere between 7-10 years.

Feb 28, 2011 | Panasonic Flat Panel Televisions

2 Answers

I lost power in my house. I cannot get the TV to power up. Is there a reset button? what do I have to do to get power on the TV? All the other components linked to the TV are working.

Now,there is no power to the tv at all?Yes.Tries tv unplug,replug it back like about and hour later.That the resetting tv back to the factory setting.The tv now should be working again.If tv still have the same result,tv power supply board have problems,that the board,where the power a/c cord plug into it.Check the tv power supply board fuse,because u lost main power to the house.If u lucky,the tv power supply board only have a dead fuse,fuse is near where the power a/c plug,plug into tv to get it power.Fuse can buy it anywhere like Radio Shack like $1.50.After u repalced the fuse,if tv still getting the same result,than sorry ur whole power supply board have problems and it is dead.Tries websites like, to buy a whole refurbish power supply board for the replacement.

Feb 23, 2011 | Samsung LN52A850 52 in. LCD HDTV

1 Answer

We have had our Proton TV for about 4 years. Tonight, we noticed that the red light was not on when trying to turn on the TV. We disconnected the TV to a different surge protector and wall outlet. We...

More likely to have power supply failure.
It is not for beginner to fix the power supply down to component level.
New power supply is about $60, shop will charge about $200+ for repair.

Check the power supply; look for bad caps with leaking/bulging tops, check to see if you have standby +5vdc at the power supply connector, the front red indicator will not be on if you do not have this +5vdc standby voltage due to shorted out Q7 and ZD4.
Power supply:

Please leave rating if it helps.

Jan 16, 2011 | Protron Flat Panel Televisions

2 Answers

The tv does not turn on. Power on lamp remains dark. Power cable checked out ok

Power supply board is dead.Replaced the power supply board will solved this problems.Tries Websites, to buy a refurbish power supply board.

Feb 18, 2010 | LG 20LS7DC 20 in. LCD TV

1 Answer

I need a new power supply board but cant find one anywhere

Ur could purchase new power supply at these website.Tv Repair,, Partstore,or

Sep 29, 2009 | Soyo DYLT032C 32 in. LCD Television

Not finding what you are looking for?
Protron PLTV-32 Television Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Protron Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66537 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you a Protron Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides