Question about Vehicle Parts & Accessories

1 Answer



Posted by on

  • 1 more comment 
  • DirtySanchez Apr 27, 2009

    tach wire was learned... i even tried to start it with the voltage sense but same thing.... then i tried with the key in it (to see if i have passlock) and still the same thing....

  • jason skovly May 11, 2010

    what type of car are you installing it on

  • Anonymous Mar 31, 2014

    how can i reprogram remote start.



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

What kind of car is it first i can help fix this if you the correct bypass and tach wire in the correct location you will also need to learn the tach how you do this is to start up the car and as fast as you can hold the valet button and the led that is mounted in your car will start to flash let go and shut the car off and try this if it doesnt work let me know

Posted on Jan 11, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why won't it start vehicle?

[PDF]Responder LE Model 5701 Security and Remote Start ...'s+Guide.pdf
the year, make and model of the vehicle; vehicle license number and vehicleidentification number. All ..... One five-button/2-way Supercode Responder LE RemoteControl. ? .... Disarm. Unlock LED blink for one second with 2 Beeps. Remote. Start..... Long-time Viper system users will notice the following differences:.

Viper LED 2-Way Security + Remote Start System
Viper's elegant new Responder LE transceivers mark a giant leap forward in 21st century vehicle security and remote start, and an evolutionary milestone for the ...

Viper 5901 remote start error fix - YouTube

? 2:38
Jan 13, 2013 - Uploaded by Power2ThePeopleZ
5901 won't start vehicle; gives an error. ... or even try to open the hood. the door remains locked when you start the car with theviper alarm.

Help With Programming/Pairing Viper Remote - YouTube

? 2:49
Dec 2, 2010 - Uploaded by Paul L
I have a two-way remote from my Viper 5901 system. ... The other car (one in video) has the Viper 5701 system in it. .... and then release 3) press the remote start button 2 times until pairremote is displayed 4)press and old ... I had the same problem that the remote won't pair with the system no matter what.

15964701 Viper 5701 2 way alarm w/ remote start won't

Jan 05, 2016 | 5701 VIPER 5701 2-WAY ALARM w/REMOTE START

1 Answer

When I try to use my automatic start on my viper sst my car wont start up.

The Remote start is hooked up wrong. They have the power for the starter connected to the wrong wire. Its not reading that the car has started and when you put the key in it recognizes that its running. Take in it to who ever installed it and have them change those wires around.

Nov 09, 2011 | 5900 SST 2-Way Security System / Remote...

1 Answer

I have a viper remote start that came with the used i car i bought, the remote start worked great for the first few months of winter, now when i start it up, it runs for 2 seconds then dies, takes up to 6...

Your alarm may have lost the tach signal, that was learned to it, when it was originally installed. That would cause the remote start to try starting the vehicle over and over again, until it finally stays running, because it can't read the engine speed to know it's running.
If you can find the valet push button switch in your vehicle, try this; Start your car with the key and immediately after it starts, press and hold that valet push button switch until the alarm led on the dash stays lit up or the park lights flash. Then, release the valet switch, shut the car off and try remote starting it. That is the procedure to re-learn the tach signal. Hope it works for you.

Feb 10, 2011 | Remote Start System

1 Answer

We just bought a 2004 vue with a viper remote start. it will try to start the engine 3 times without sucess it seem it does not crank the engine long enough can this be changed? not sure of the model

The starter is working normal. It try to start up 3 times and after the 3rd it isnt running then it stops. What it sounds like is that you are having a problem with the passlock system in the truck. The passlock is a resistance built into the key tumbler that gets sent to the bcm in order for the truck to stay running it needs to read this signal. If the tech didnt hook this up right then the truck will never stay running.

Dec 04, 2010 | Remote Start System

1 Answer

Hi there i have viper starter on my honda civic i tried to start the car it tried to start it three times but the car does not start i do not know if it needs re prgraming or what

The remote start is suppose to try 3 times to start and after the third time if it hasnt started then it won't try again until you press the buttons. This sounds like you may be having a problem with the transponder interface that allows the car to stay running after it has been started. You can look on the dashboard and there is a red light that comes on when your igniton is first turned on then shuts off. If that light is flashing when you are trying to remote start it,then the transponder interface is the problem.

Oct 29, 2010 | Remote Start System

1 Answer

Viper remote cranks motor but doesnt keep running. Tried valet switch and still does not start. Just fixed anti-theft on car by leaving key in ignition. Did this cause the remote not to work correctly?...

did it ever work before?

A couple things here. It is best to have a "tach wire" and the system needs to be programmed to learn the tach signal in order to know if the car is running or high reving or dead. If it gets no signal of the sort the next option is voltage monitor, it monitors the voltage for an increase to show that the alternator is running. Either way that signal is not gettting to the viper brain or it has not learned that signal. You need an install manual, did you install the alarm?

Jan 10, 2010 | Remote Start System

1 Answer

Took out the viper 550hf and now it will not stay running

You may have to check to see what kind of bypass was used for the remote start, as the bypass is installed between a small gauge white wire that is used for the "code" to signal the computer to allow the car to remain running, via the fuel pump. If the wire was not reconnected, the car will start, but only run for a few seconds.

May 05, 2009 | Vehicle Parts & Accessories

1 Answer

Remote start on my viper alarm wont stay running

it is getting a shutdown trigger from somewhere. check manual for diagnostic trouble code section to find out where from is step one.

Jan 14, 2009 | 5701 VIPER 5701 2-WAY ALARM w/REMOTE START

Not finding what you are looking for?
Vehicle Parts & Accessories Logo

Related Topics:

467 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vehicle Parts & Accessories Experts


Level 3 Expert

78267 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Brad Brown

Level 3 Expert

16981 Answers

Are you a Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides