Question about Siemens SpeedStream 4200 (13A4200001) Bridge

2 Answers

Can't get a wireless router to work with a speedstream 4200

I am trying hook a belkin N wireless router up to a speedstream 4200 dsl modem and it will not connect to the internet. i have switched the wires around and tried setting up with different wire configurations and it still won't connect to the internet with the wireless router hooked up but does just fine when i'm just using the speedstream modem, can you please tell me why i can't get this to work, and what needs to be done to hook the wireless router up correctly. e-mail add. nathanoh2002@yahoo.com

Posted by on

  • 1 more comment 
  • lozbrico Feb 15, 2009

    I have teh same problem, however I can get the modem and router to provide wireless connections for my 2 laptops however the source PC can't connect to the internet?? Any suggestions anyone?

  • jake_3850 Feb 20, 2009

    I have the same problem with my linksys router, not only do you have to clone the mac address, they told me you have to switch it to full bridge, which there is no option for in the speedsteam management page so who knows?

  • cherann25 May 12, 2009

    I have a wired linksy router model # BEFSR41 ver # 3 and am hooking up a wireless Belkin N router to a Speedstream 4200 modem, I cannot get this to work. I have a Mac computer that is the main, then a table top, and lap top, down stairs. I don't know if I have to remove the wired router or not. If I do I don't know how to do this. Can anyone help ??

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 176 Answers

From the telephone outlet the dsl line (telephone line) connects to the dsl jack of the Speedstrem 4200 DSL Modem.

From the modems open port you connect one Cat5 network cable into the port (in back) of the Belkin N Wireless router.

For wireless internet connection to begin you must also do a wireless set-up on the software side of the Belkin router or through their web interface.


Posted on Jan 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 771 Answers

This may actually be an issue with your ISP. There is a good possiblity that your ISP has bound your connection to the MAC address of the network card on your computer. This is a common occurance which is why router manufacturers give you the option of having your router clone your computer's MAC address. Go into your router's management an perform the clone, sorry I cannot give you more details but I don't know the specific model of your Belkin router.

Posted on Jan 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a siemens 4200 adsl modem i had a net gear modem before and that was not working with wireless internet and now this modem wont let me connect wireless either only with the ethernet cabel. help!


Hello Mate,
the siemens speedstream 4200 is a DSL modem/Router which doesn't have wireless connection. So even tough if you have a computer equiped with a wireless adapter, you will not be able to connect wirelessly because the siemens 4200 doesn't act as wireless access point.
You may need next time to check first if the modem/router to buy support wireless (wifi g or n) and make sure that it's not only a modem, it should be also a router.
i attached here some references for you from the top brands:
1. Linksys DSL modem/Router with wireless N: http://www.linksysbycisco.com/MEA/en/products/WAG120N
2. Linksys DSL modem/Router with Wireless G: http://www.linksysbycisco.com/ANZ/en/products/WAG54G
You can find other brands as Dlink, Netgear ...
Best Regards,

Oct 29, 2009 | Computers & Internet

1 Answer

SPEEDSTREAM 4200 MODEM CONNECTED TO WRT54G ROUTER WIRELESS DONT


turn on the wireless option in the router...
plug your computer into the router type in
192.168.1.1
username: admin
Password: public

go to wireless tab
turn it on

END!
P.S.
Also you have to be in range!

Sep 25, 2009 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

Speedstream modem went out so I had to completely disconnect the router and re-establish the DSL connection... finally got it reset and internet worked fine on PC. I hooked the Belkin wireless router back...


Have you tried powering all three off, restart the modem, wait until it is fully up, restart the router, wait until it is fully up and then restart the computer? Sounds like the IP address's are not coming up correctly. As far as the reconfigure problem, the support guy couldnt help you with that?

Aug 09, 2009 | Computers & Internet

1 Answer

Connect router to playstation 3


You need to first plug the DSL modem into the router. log on to the router. Configure the router byusing the user name and password as supplied by your dsl provider. once the router connects to your dsl provider, you should be able to connect your playstation to the wireless network.

Jun 02, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Belkin g+ mimo router can't detect internet


have you tried resetting the network adaptor on the belkin, whictch provider are you using for internet connection?

Jan 25, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Belkin Router - Network works for 5 minutes than everything loses internet capability.


hi,

           This issue usally occurs when the router is able to save the data stored or in  other words the Router id not able to AUTHENTICATE,  but as you already got a new router and you have already done the fireware upgradation of the router. we can also upgrade the firmware of your speedstream modem.

 

plz do these following steps ,( plz disconect the router from the computer and modem completly while doing the steps )

 

 

 

The Efficient 5260 modems that can be upgraded are as follows:

Look on the label on the bottom of your modem. It should read:

SpeedStream 5260 Ethernet ADSL Modem
Part Number: 060-5660-00x (where x=any number)
Revision: any (all revisions seem to work)

If your part number reads anything else, your modem is most likely not upgradable.

For those curious, 5660 models 003 and earlier do NOT support G.Lite ADSL, only DMT. If you are buying a 5260 or 5660 model secondhand, and your DSL ISP uses G.Lite DSL, it would be a good idea to check with the person selling you the DSL modem.

UPDATE: As of 5660 Firmware v2.3.0(2) and later all 5660 including 5260/5660 hybrids support G.Lite ADSL. It pays to use the latest Firmware.

 

 

 

PLZ REPLY IF THIS HELPS, I WILL TRY TO FIND OUT THE RESOLUTION FOR THIS ISSUE

 

REGARDS.

Gunjan ';';';';';';';

Oct 18, 2007 | Belkin (F5D8231-4) Wireless Router...

1 Answer

Speedstream modem 4200


put the modem in bridge mode and then connect a DSL/cable router to it...you'll have to configure the PPOE if its DSL... Cable is a little easier because there usually is a MAC authientication not username and password...plug dsl/cable router into cable modem...turn both off for about aminute then turn modem on first then router... Be careful most routers with wireless have it enable with no security by default...turn it off or set securty (wirelss that is)

Aug 27, 2007 | Siemens SpeedStream 4200 (13A4200001)...

2 Answers

Cant connect my router


what is the source of your connection thru telepon line or a broadband connection or DSL?i need to know this........

Jul 16, 2007 | Siemens SpeedStream 4200 (13A4200001)...

Not finding what you are looking for?
Siemens SpeedStream 4200 (13A4200001) Bridge Logo

1,073 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

john smith

Level 2 Expert

381 Answers

Are you a Siemens Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...