Question about Televison & Video

1 Answer

My Janome 10000 seems to have jammed the fly wheel won;t turn, There is nothing stuck in machine, needle is not bent

Is it possible that the computer board is going. It sometimes clears itself if you turn it off and leave for several hours.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,238 Answers

Its better if your machine will checked by the pro.

Posted on Nov 06, 2012

  • Suzanne RAdojcin Nov 09, 2012

    I have already had it to the janome service centre in Southland, he said it just needed a service but it is still happening

×

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 98 Answers

SOURCE: turns off and sometimes comes back on by itself

DLP --- need to exchange the thermostat.
LCD --- replace the Main Board.
PDP --- need to check Power Board or Y-Main

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My janome me 10000 keeps giving me a warning message that says is fabric to thick is needle bent is something stuck in machine. I just had a new circuit board put in. Why is this doing this


That is the wierdest error message I've ever seen on a sewing machine. Did you try a brand new needle? Are you sewing thick fabric (does the message appear when sewing light-weight fabric? Remove the bobbin case from the machine and check for thread wrapped somewhere. If you are not able to find an answer on your own, then it's probably best to take it for service.

Janome MC10000 Warning Machine Wont Sew

Jan 28, 2018 | Janome Sewing Machines

1 Answer

Janome 10000 - I get a warning message and the machine quits. I've had it to a repair person 4 times


If you've had it in for repair four times, then the technician is not doing a good job. Take it back and insist it be fixed... talk to the manager and relay your dissatisfaction with the service. OR ask for a refund and take it to a reliable Janome technician.

You don't mention the error message, so it is very difficult to try to assist.

...

Oct 22, 2016 | Janome Memory Craft 10000

1 Answer

Hand wheel won't move.Scissorbutton wont work.


Repairing a Janome or New Home Sewing Machine ...

www.thriftyfun.com/Repairing-a-Janome-or-New-Home-Sewing-Machin...
Question: Memory Craft Machine Won't Run ... I'm a computer repair technician and good with tools, is this something I could fix or should we .... machine which will zig zag fine if i turn the wheel by hand or sew very slowly; as soon as I speed ...

Janome won t turn Sewing Machines Questions & Answers ...

www.fixya.com > Forum > Tags > won t turn > Sewing Machines
Janome sewing machines won t turn related questions and answers. ... Ad. Question about Memorycraft 6500P Computerized Sewing Machine ... it could be a part has worn or broken, esecially when the hand wheel won't turn,, it needs to be.

Janome wheel not turning Sewing Machines Questions ...

www.fixya.com > Forum > Tags > wheel not turning > Sewing Machines
Janome sewing machines wheel not turning related questions and answers. ... 10000 janome jamming fly wheel won't turn fly wheel won't turn warning for too thick ...the hand wheel is not moving the needle at all Hi I was unable to move the needle at all ... Janome Memory Craft 9000 Computerized Sewing Machine.

Jan 25, 2016 | Janome Memorycraft 6500P Computerized...

1 Answer

My janome 11000 memorycraft's needle threader has jammed in the down position and cannot be moved


Thanks to floraq803, we have our 11000 working again. The needle threader was stuck in the down position. We turned off the machine, and turned the wheel (which controls where the needle is) until the needle threader bar was straight (approximately 1/2 way between the needle being all the way down and all the way up). Turned on the machine and the threader came back up again. Now back to sewing.

Jan 20, 2013 | Janome Memory Craft 9000 Computerized...

1 Answer

My Janome 10000 seems to have jammed the fly wheel won;t turn, There is nothing stuck in machine, needle is not bent


yes, it is possible. or a part inside the machine could be broken
it would be a good idea to have the machine checked.

Nov 06, 2012 | Janome Memory Craft 10000

1 Answer

10000 janome jamming fly wheel won't turn


I would replace the needle anyway. It's hard to tell if one is bent or not.

Remove your feed dog/needle plate and the bobbin cover. Take out your bobbin and bobbin carrier.

Get out a magnifying glass and really examine. Look for thread ends in between moving parts.

Also check the thread pathways. Especially where the take up lever is hidden. I've heard of some ladies finding threads snarled up in that area which caused problems like this.

Good luck. If all else fails take it in for repair.

Nov 04, 2012 | Janome Sewing Machines

1 Answer

The bobbin seems to be stuck and will not move...all it's doing is 'eating' the thread...what do i do? Thanks


Can you get the bobbin out of the bobbin holder? unplug the machine, then remove the needle plate, needle and pressure foot. Now can you get the bobbin out? It is possible that the bobbin holder has moved in the rotary hook, they can jump sometimes as held in by a magnet.

Check out your manual for instructions to remove the bobbin holder, it should show you how to take it out, and then clean under it, there is possibly thread caught in this area causing the malfunction.

You may find turning the fly wheel a little to turn the hook will help to free up the holder and get it out.

Here is image from my Janome 6500 manual, it should be similar for your MC.
tally_girl_29.jpg
So clean out the underneat of the bobbin holder, then reinsert it, and reassemble, thread and test. If this doens't sort the problem, then time to drive it to the Janome shop.

May 23, 2011 | Janome Memory Craft 9000 Computerized...

Not finding what you are looking for?

Open Questions:

0 Answers

samsung pn64f8500 boot loop with evoulution kit 3000za installed I had perfectly working Samsung plasma ph64f8500 working fine with Samsung evolution kit 3000 ZA installed. Then we moved I took off the evolution kits so the movers would not knock them off. I powered up without the evolution kit installed accidently. Now both plasma are stuck in boot loop. They power up but go to the smart tv logo and cannot find the evolution kit. I read somewhere a long time ago that I needed to reset the evolution kit to a state where it had not been installed. The current issue is the Main Logic Board eeprom instructs the unit to boot correctly but it cannot find the evolution kit. If you boot without the evolution kit the system halts and indicates on the screen the evolution kit has been uninstalled and you must install it if you wish to view. If it could find the evolution kit one could go thru the menu to uninstall it correctly. One option is to manually reset the eeprom to remove the install instruction that boots looking for the evolution kit. I have been looking for the eeprom on the Samsung main logic board but I cannot download the logic board schematic. I cannot find the logic board number. The main logic board is BN94-0625C. The logic board has tow other part number references.• MFR Part Number 1: Samsung BN94-06205C • Board Number(s): BN41-01998A, BN97-06633G i have been researching the logic board IC Numbers and belive that IC 1701 is the eeprom that requires reset. The youtube videos for similar models indicate a eeprom that is listed as a part nmber for this samsung pn64f8500 unit as 24C512 and shows how to jumber 2 IC locations that will force the eeprom to reset to standard starup without the Evoution Kit 3000

Jul 16, 2018 | Samsung Televison & Video

Televison & Video Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75564 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

80263 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...