Question about NEC DTR16D Phone

1 Answer

Change time on phone system - NEC DTR16D Phone

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 277 Answers

Time and date is system wide programming and not the phone.
You need to read the Administration Guide that matches the phone system model you have. You also need to do it from the Administration phone, usually the 2 lowest ext #'s on the system.
NEC DTR16D Phones work on several NEC systems.
If it is an Elite or IPK then search internet for:
NEC ipk attendant guide

Posted on Nov 06, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How do i change the time and date!? nec 80570

On an Elite or IPK phone system, which are just some of the systems that use this phone, you make the time change from one of the 2 main operator phones, x100 or x101. Without lifting handset, press Feature, 9, #, the phone goes into time program mode. Enter the hour and the minute, press Feature to exit and write OR press HOLD to get to date change, enter day of week as 1 through 7, HOLD, enter month as 1 through 12, HOLD, dial in year, and press Feature to write and exit. The other systems that use this phone aren't as easy. Good luck.

Sep 03, 2014 | NEC Lands Phones

1 Answer

How do you change the time on the display panel

You have to change the time on the phone system by logging in as administrator. Once it is changed it will update the time on all of the phones at the same time. Remote IP phones are a little different in that they only sometimes get the correct time from the system when they are booted and connect to the system.

Jan 30, 2012 | 3Com 3102 IP Phone

1 Answer

Change Time

THe older norstar systems you had to go into programming to change time and on the newer systems press feature * time on your phone and follow the prompts. On the older systems go in to programming press feature ** 266344 (config) then pswd 23646 (admin) on your key pad this gets you into programming press next until you get to change time. You need an overlay which can with your phone system manual. If need more info please ask agian hope this helps.

Nov 17, 2009 | Nortel Norstar 16-Line PBX Speakerphone

2 Answers

How do you change the time on the phones. Since Daylight Savings time My clock is off by an hour

How do I change the Time and Date on a Merlin Legend system?
To change either the Date or the Time on the Legend system, you must program it from the main System Programming console (MLX-20L). This will change the Time or Date on all the display phones throughout the system, except the ATL (Analog) display sets. These phones must be programmed on each individual set.
How to change the Date in the Legend system:
  1. Press Menu.
  2. Press System Program.
  3. Press Exit.
  4. Press System.
  5. Press Date.
  6. Enter date in following format: mmddyy (where MM is the month, DD is the day, and YY is the year).
  7. Press Enter.
  8. Press Exit.
  9. Press Home to exit programming mode.
How to change the Time in the Legend system:
  1. Press Menu.
  2. Press System Program.
  3. Press Exit
  4. Press System.
  5. Press Time.
  6. Enter the time in military/24 hour format: HH:MM (where HH is the hour, 01-24, and MM is minutes, 00-60).
  7. Press Enter.
  8. Press Exit
  9. Press Home to exit programming mode.

Nov 04, 2009 | Lucent Merlin Legend MLX-20L Phone

2 Answers

Change the time on my Avaya Partner Phone

You can not do phone system programming from anything EXCEPT Extensions 10 or 11.

Nov 17, 2008 | Avaya 700340193 Corded Phone

1 Answer

Change time on phone

Phone system console. Contact your system admin, as it depends on exactly which system you have.

Jun 11, 2008 | Avaya Definity 6408D Corded Phone

1 Answer

Change the time on the phone system

The time for the phone system must be changed within the system programming itself. We have SuperSet 4025s as part of our Mitel SX 2000 Light system. The technician we use was able to remote into the system and change the time for us. As far as I know that is the only way to do it unless someone in your building knows how to program the system.

Mar 10, 2008 | Mitel Superset 4025 Corded Phone...

1 Answer

How do you change the Time?

This is a phone system phone. The time is stored in the main control unit, not the telephone. You will need instructions for changing the time in your system and the phone's part number will not help you. Your phone system should start with the part number "KX-TGA" KX-TGA???? Here is a link to a site that has time change instructions:

Sep 20, 2007 | Panasonic KX-T7630 Corded Phone

Not finding what you are looking for?
NEC DTR16D Phone Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Lands Phones Experts

Brian LaDuca

Level 2 Expert

149 Answers

george  peters
george peters

Level 3 Expert

860 Answers


Level 3 Expert

102366 Answers

Are you a NEC Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides