Question about Brother HL4570CDW Printer
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I have 'reused' the same drum three times and still prints like a charm.
Open the toner door and pull out the toner/drum assembly. Take the toner off the drum tray. Use a alcohol pad or lint free cloth and wipe the mauve coloured drum to remove the excess lint and toner collected on the drum. Rotate the drum with the white gear and keep cleaning until the whole drum is done.
Put the toner back in the drum tray. Clean the corona wire by sliding the blue tab back and forth 3 or 4 times. Put the toner/drum back into the printer and close the door.
After the printer does the self test the drum light will cone on again so then you need to reset the counters.
Open the door again
Hold the GO button until all 4 lights are lit up
Release the GO button
Close the door
Printer will self test and should extinguish all the trouble lights.
Posted on Apr 20, 2009
You need to reset the drum counter. Open the front door and hold the go button until all the lights flash. Shut the door, ready to print...If you press the go button 3 times it will give you a printout that shows the usage level of the drum.
Posted on Jun 25, 2009
you forgot to slide the tab, unless you do this you cannot use your printer im afraid, drum unit is a cylindrical part unit, unless otherewise you correct this instlltion procedure there is no othere way around it
Posted on Nov 25, 2008
Here is a photo of the drum unit and a link to the Brother website for you printer.
Posted on Mar 11, 2010
Tips for a great answer:
May 07, 2015 | Brother Office Equipment & Supplies
Apr 30, 2013 | Brother "hl-4570cdw color laser printer...
The Drum LED and the Error LED alternates turning on and off.
Meaning of LED Indication
The corona wire needs to be cleaned. To see how to clean the corona wire, click here.
Please click on YES if this helps,
Mar 23, 2011 | Brother HL-2170W Laser Printer
Feb 15, 2011 | Brother HL-4050CDN Printer
Jan 20, 2010 | Brother HL-4040CN Laser Printer
Jun 25, 2009 | Brother HL 5040 Laser Printer
Sep 13, 2008 | Brother HL-2040 Laser Printer
Jul 28, 2008 | Brother HL-2040 Laser Printer
2,126 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: